Shark V1310C Vacuum Cleaner Manual

The Shark V1310C is a versatile upright vacuum cleaner designed for deep carpet cleaning and hard floor surfaces. It features a powerful motor, advanced swivel steering, a lift-away pod for portable cleaning, multiple attachments, HEPA filtration, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized brushroll, Dust cup with HEPA filter, Hose with wand, Cleaning attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Powerful Suction	High-performance motor for deep carpet cleaning
Swivel Steering	Maneuvers easily around furniture and obstacles
Lift-Away Pod	Detachable for portable cleaning above floors
Motorized Brushroll	Agitates carpets to remove embedded dirt
HEPA Filtration	Captures 99.9% of dust and allergens
Large Dust Cup	Easy-to-empty, no bags required
ON/OFF Switch	Controls power to the vacuum
Brushroll Control	Enables/disables brushroll for hard floors
Height Adjustment	Multiple settings for different carpet types
Attachment Holder	Stores tools on the vacuum for easy access

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

Attach the handle: Insert handle into upright body until it clicks securely.
Install the hose: Connect hose to the pod and secure the wand.
Attach cleaning tools: Place crevice tool, dusting brush, and upholstery tool in holder.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, perform a quick test to ensure proper operation.

Check brushroll: Ensure it rotates freely and is free of obstructions.
Empty dust cup: Ensure it is empty and filter is installed correctly.
Select floor setting: Adjust height based on carpet or hard floor.
Turn on power: Use ON/OFF switch; begin cleaning in forward motion.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark V1310C Upright Vacuum.
Power: 120V AC, 60Hz, 10 Amps.
Suction Power: Adjustable via settings.
Filtration: HEPA filter, washable foam filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 15 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: ON/OFF switch, Brushroll ON/OFF button. Body: Height adjustment lever, Dust cup release, Hose release.

Settings: Height adjustment (Low for bare floors, Medium for low-pile carpets, High for plush carpets). Brushroll control (ON for carpets, OFF for hard floors). Suction power (standard mode, max mode for deep cleaning).

Using Attachments

For above-floor cleaning: Detach Lift-Away pod, connect hose and wand, attach desired tool.

Detach pod: Press release button and lift pod away from upright body.
Connect hose: Ensure hose is fully inserted into pod.
Select tool: Attach crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.
Clean: Turn on vacuum and use tool as needed.

Tip: Store attachments on holder when not in use for convenience.

Cleaning Modes

Upright mode: For carpets and large floor areas. Lift-Away mode: For stairs, furniture, and above-floor cleaning.

Upright cleaning: Ensure brushroll is ON for carpets, OFF for hard floors.
Lift-Away cleaning: Detach pod, use hose and attachments.
Edge cleaning: Use crevice tool along baseboards and corners.
Furniture cleaning: Use upholstery tool with gentle strokes.

WARNING! Do not use vacuum to pick up sharp objects, which may damage dust cup or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: When full, press release button, empty contents into trash. Clean filters: Wash HEPA and foam filters monthly with cold water, air dry completely. Check brushroll: Remove hair and debris wrapped around brushroll regularly. Inspect hose: Ensure no clogs; use wand to clear obstructions.

CAUTION! Unplug vacuum before maintenance. Do not use vacuum without filters installed.

Safety Information

Read all instructions before use. Keep away from children. Do not use outdoors or on wet surfaces. Do not vacuum flammable materials. Always turn off and unplug before servicing.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for clogs.
Brushroll not spinning	Obstruction/overheat protection	Turn off, unplug, remove debris from brushroll; wait 30 minutes if overheated.
Vacuum won't turn on	Power cord/outlet issue	Check power cord connection; try different outlet; ensure ON/OFF switch is engaged.
Unusual noise	Foreign object in brushroll/hose	Turn off, unplug, inspect brushroll and hose for obstructions.
Dust cup not sealing	Misaligned or dirty seal	Ensure dust cup is properly seated; clean seal area.

Reset: Unplug for 30 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com