Shark V1310 Vacuum Cleaner Manual

The Shark V1310 is a versatile upright vacuum cleaner designed for deep carpet cleaning and above-floor cleaning. It features a powerful motor, advanced swivel steering, a lift-away pod for portable cleaning, a HEPA filter, multiple attachments, and various cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Swivel steering handle, Dust cup, HEPA filter, Crevice tool, Upholstery tool, Pet hair brush, and Extension wand.

Feature	Description
Powerful Suction	High-performance motor for deep cleaning carpets and floors
Lift-Away Pod	Detachable pod for portable above-floor cleaning
Swivel Steering	Enhanced maneuverability around furniture and obstacles
HEPA Filter	Captures 99.9% of dust and allergens
Brush Roll On/Off	Switch for carpets or hard floors
Large Dust Cup	Easy-empty container with one-touch release
Attachments	Crevice tool, upholstery tool, pet hair brush, extension wand
Adjustable Handle	Comfort grip with controls at fingertips
Cord Length	25-foot power cord with wrap-around storage
Warranty	5-year limited warranty

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

Attach handle: Insert handle into main body until it clicks into place.
Install dust cup: Align and push dust cup into position until secure.
Attach hose: Connect hose to front of vacuum; ensure tight fit.
Install filter: Place HEPA filter into filter compartment; close cover.
Attach wheels: Ensure all wheels are properly secured.

WARNING! Keep fingers away from moving parts during assembly. Ensure all connections are secure before use.

First-Time Use

Before first use, ensure vacuum is fully assembled and filter is installed.

Plug into standard 120V outlet: Ensure cord is fully unwound.
Select cleaning mode: Use brush roll switch for carpet or hard floor.
Adjust height: Set carpet height selector to appropriate setting.
Begin vacuuming: Press power button; push vacuum forward and back.
Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Do not vacuum wet surfaces, large objects, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark V1310 Upright Vacuum.
Power: 120V, 60Hz, 12 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 quarts.
Filtration: HEPA filter with anti-allergen seal.
Cleaning Modes: Carpet, Hard Floor, Above-Floors.
Attachments: Crevice tool, upholstery tool, pet hair brush, extension wand.
Weight: 15.2 lbs.
Warranty: 5-year limited.

Controls and Settings

Main controls located on handle: Power button, Brush roll on/off switch, Carpet height adjuster, Lift-Away release button.

Handle Controls: POWER, BRUSH ROLL ON/OFF, HEIGHT ADJUSTER, LIFT-AWAY RELEASE.

Cleaning Modes: Carpet mode (brush roll on), Hard floor mode (brush roll off), Above-floor mode (Lift-Away pod detached). Height Adjustment: Low pile, Medium pile, High pile carpets. Suction Control: Automatic adjustment based on floor type.

Using Attachments

Attach tools for above-floor cleaning: Crevice tool, Upholstery tool, Pet hair brush, Extension wand.

Detach Lift-Away pod: Press release button on handle.
Attach hose: Connect hose to pod inlet.
Select tool: Insert desired tool into end of hose or extension wand.
Clean: Use tool on stairs, furniture, curtains, or tight spaces.

Tip: For pet hair, use pet hair brush on upholstery. For dusting, use soft dusting brush.

Cleaning Modes

Three primary cleaning modes for different surfaces.

Carpet Mode: Brush roll on for deep carpet cleaning; adjust height for pile.
Hard Floor Mode: Brush roll off to prevent scattering debris.
Above-Floor Mode: Detach Lift-Away pod; use attachments for stairs, furniture.
Spot Cleaning: Use hose and crevice tool for concentrated areas.

WARNING! Always turn off vacuum before changing modes or attachments.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filter: Remove and tap HEPA filter monthly; wash every 3 months.
Check brush roll: Remove tangled hair or debris regularly.
Inspect hose: Clear any blockages.
Store properly: Wrap cord; store attachments in caddy.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and attachments for blockages.
Brush roll not spinning	Tangled debris or belt	Turn off and unplug; remove debris from brush roll; check belt.
Vacuum won't turn on	Power cord or outlet	Check power cord connection; try different outlet; check circuit breaker.
Unusual noise	Foreign object in brush roll or motor	Turn off immediately; inspect brush roll and hose for objects.
HEPA filter dirty	Reduced airflow	Clean or replace HEPA filter as per instructions.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com