Shark V1055B Vacuum Cleaner Manual

The Shark V1055B is a powerful upright vacuum cleaner featuring advanced suction technology, a HEPA filtration system, multiple cleaning modes, a motorized brushroll for carpets and hard floors, a large-capacity dust cup, LED headlights, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brushroll, HEPA filter, Dust cup with easy-empty mechanism, LED headlights, Handle with controls, Power cord, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Motorized brushroll	Automatically adjusts for carpets and hard floors
HEPA filtration	Captures 99.9% of dust and allergens
Dust cup	Large capacity with one-touch empty release
LED headlights	Illuminates dark areas under furniture
Power switch	Turns vacuum on/off
Brushroll on/off	Disengages brushroll for hard floors
Suction control	Adjusts suction power for different surfaces
Handle release	Converts to handheld mode
Attachment holder	Stores tools on vacuum body
Cord wrap	Integrated cord storage hooks

Assembly & Setup

Unpack and inspect all parts. Assemble following steps.

Attach handle: Insert handle into main body until it clicks securely.
Install dust cup: Align and push into place until locked.
Insert HEPA filter: Open filter compartment, insert filter, close securely.
Attach hose and wand: Connect hose to vacuum port, attach wand to hose.
Store attachments: Place tools in onboard storage clips.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into standard 120V outlet; follow operational steps.

Select surface setting: Use brushroll on for carpets; off for hard floors.
Adjust suction: Use suction control for delicate rugs or high-pile carpets.
Begin cleaning: Press power switch; push vacuum forward and back slowly.
Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

Model: Shark V1055B Upright Vacuum.
Power: 120V, 60Hz, 12 Amps.
Filtration: HEPA filter, washable pre-motor filter.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Cleaning Modes: Carpet, Hard Floor, Above Floor (handheld).
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. Power Switch: Turns motor on/off. Brushroll Switch: Engages/disengages brushroll. Suction Control: Adjusts airflow. Handle Release: Converts to handheld mode.

Indicators: LED lights indicate power status and brushroll engagement. Filter Check Light: Illuminates when filter needs cleaning.

Settings: Carpet mode (brushroll on, high suction), Hard floor mode (brushroll off, medium suction), Handheld mode (for stairs and furniture).

Using Attachments

For above-floor cleaning: detach wand and attach tools.

Convert to handheld: Press handle release button, lift handle section.
Attach tool: Click desired tool onto wand or hose end.
Select suction: Use suction control as needed.
Clean: Use crevice tool for edges; dusting brush for surfaces; upholstery tool for furniture.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Three primary modes for different surfaces.

Carpet Mode: Brushroll on, suction high. Ideal for deep cleaning carpets and rugs.
Hard Floor Mode: Brushroll off, suction medium. Prevents scattering debris on hard surfaces.
Above-Floor Mode: Handheld with attachments. For stairs, furniture, ceilings, and cars.

WARNING! Do not use carpet mode on hard floors as it may cause damage. Always turn off before changing modes.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filters: Wash HEPA and pre-motor filters every 3 months (air dry completely).
Clear brushroll: Remove tangled hair and fibers regularly.
Check for blockages: Inspect hose, wand, and air passages if suction decreases.
Inspect cord: Look for damage; do not use if cord is frayed.

CAUTION! Unplug vacuum before all maintenance. Do not operate with wet filters.

Care & Storage

Store in cool, dry place. Wrap cord around hooks. Empty dust cup before storage.

CAUTION! Do not store with wet filters. Keep away from heat sources and direct sunlight.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; test outlet; ensure power switch is on.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and brushroll for clogs.
Brushroll not spinning	Engagement switch/tangles	Ensure brushroll is on; clear hair and debris from brushroll.
Overheating	Blockage/filter	Turn off, unplug, check for clogs; clean filters; let cool 60 minutes.
Unusual noise	Foreign object in brushroll	Turn off, unplug, inspect brushroll area for obstructions.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com