Shark V1055 Vacuum Cleaner Manual

The Shark V1055 is an upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes, motorized brushroll, LED headlights, and a large-capacity dust cup. It includes attachments for versatile cleaning, such as a crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with motorized brushroll, LED headlights, large dust cup, HEPA filter, hose with wand, and attachment set.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install wand: Insert wand into hose connector; ensure secure lock.
3. Attach hose: Connect hose to wand and body ports.
4. Install filter: Place HEPA filter into filter compartment.
5. Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Select floor type: Use CARPET mode for carpets; HARD FLOOR for hard surfaces.
2. Adjust height: For carpets, set height adjustment to match pile.
3. Turn on: Press power switch; LED lights will illuminate.
4. Begin cleaning: Push vacuum forward and back in overlapping strokes.
5. Empty dust cup: Press release button to remove and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark V1055 Upright Vacuum.
• Power: 120V AC, 60Hz, 10 Amps.
• Suction Power: Adjustable via cleaning modes.
• Filtration: HEPA filter, washable pre-motor filter.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, hose release.

Body: Height adjustment lever, dust cup release, mode selector (CARPET, HARD FLOOR, MAX).

CARPET mode: Activates brushroll for deep cleaning. HARD FLOOR mode: Turns off brushroll for gentle cleaning. MAX mode: Increases suction for high-pile carpets. Height adjustment: 5 settings for different carpet types. Brushroll on/off: Disengage for hard floors or delicate rugs.

Using Attachments

Attachments stored on rear caddy. For above-floor cleaning.

1. Release wand: Press wand release button on handle.
2. Attach tool: Connect desired tool to end of wand.
3. Select suction: Use MAX mode for upholstery; lower for delicate surfaces.
4. Clean: Use crevice tool for tight spaces; dusting brush for shelves.

Tip: Ensure wand is fully inserted into hose for secure connection.

Cleaning Modes

Three modes for different surfaces.

1. CARPET mode: Brushroll on, standard suction. For medium to high-pile carpets.
2. HARD FLOOR mode: Brushroll off, gentle suction. For wood, tile, laminate.
3. MAX mode: Brushroll on, maximum suction. For deep cleaning or high-pile carpets.

Note: Switch off brushroll when cleaning area rugs or hard floors to prevent damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Empty after each use or when full.
2. Clean filters: Rinse HEPA filter monthly; air dry completely before reinserting.
3. Clear brushroll: Remove hair and debris from brushroll weekly.
4. Check hose: Inspect for clogs; clear if suction reduces.
5. Store properly: Wrap cord around cord hooks; store in dry area.

CAUTION! Unplug vacuum before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. 5-year limited warranty applies; see manual for details.

Troubleshooting

Reset: Unplug for 30 minutes; restart.

Service: 1-800-798-7398; www.sharkclean.com