Shark UVC805B Vacuum Cleaner Manual

The Shark UVC805B is a powerful upright vacuum cleaner featuring a Lift-Away canister design, advanced swivel steering, HEPA filtration, motorized brushroll for carpets, multiple cleaning modes, and a variety of attachments for above-floor cleaning. It is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, motorized brushroll, swivel steering handle, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool.

Feature	Description
Lift-Away Canister	Detachable for portable above-floor cleaning
Motorized Brushroll	Deep cleans carpets and agitates debris
Swivel Steering	Provides maneuverability around furniture
HEPA Filtration	Traps 99.9% of dust and allergens
Cleaning Modes	Adjustable for carpets, hard floors, and delicate rugs
Brushroll On/Off	Switch to turn brushroll on for carpets or off for hard floors
Dust Cup Release	Easy-empty dust cup with one-touch release
Attachments	Crevice tool, dusting brush, upholstery tool included
Power Cord	Long cord with storage hooks
Wand Length Adjustment	Adjustable telescoping wand for extended reach

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks into place.
Install wand: Insert wand into hose port on vacuum body.
Attach hose: Connect hose to wand and canister port.
Install filter: Place HEPA filter into filter compartment; ensure it is seated properly.
Attach floor nozzle: Connect floor nozzle to wand or canister for upright mode.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use brushroll switch for carpets (ON) or hard floors (OFF).
Adjust suction: Use power/suction control if available.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: Detach canister for above-floor cleaning with tools.

CAUTION! Keep vacuum away from water and wet surfaces. Do not vacuum large objects.

Specifications

Model: Shark UVC805B.
Type: Upright vacuum with Lift-Away canister.
Filtration: HEPA filter.
Brushroll: Motorized, with on/off control.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 15 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off, suction control (if equipped). Body: Dust cup release, hose release, wand release, filter access.

Cleaning Modes: Upright mode for floors; Lift-Away mode for stairs and above-floor; Bare floor setting (brushroll off); Carpet setting (brushroll on). Settings: Suction power adjustable; wand length adjustable; handle angle adjustable.

Using Attachments

Attachments connect to wand or hose for detailed cleaning.

Detach canister: Press release button to separate canister from upright body.
Select tool: Attach crevice tool, dusting brush, or upholstery tool to wand or hose.
Clean: Use tool on stairs, furniture, blinds, or tight spaces.
Reattach: Return canister to upright body after use.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Three primary modes: Upright, Lift-Away, and Handheld.

Upright Mode: For large floor areas; brushroll agitates carpets.
Lift-Away Mode: Detach canister to clean stairs, under furniture, and above floor.
Handheld Mode: Use hose with attachment for spot cleaning.
Brushroll Control: Turn off for hard floors; turn on for carpets.
Suction Control: Adjust for delicate rugs or high-pile carpets.

WARNING! Do not use brushroll on delicate rugs or hard floors without turning it off.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release; empty when full; reinstall.
Clean filter: Remove HEPA filter; tap out dust; wash if washable (air dry completely).
Check brushroll: Remove debris (hair, strings) from brushroll regularly.
Inspect hose: Clear clogs if suction reduces.
Check belts: Replace if brushroll does not spin (refer to manual).

CAUTION! Unplug vacuum before maintenance. Ensure filter is completely dry before reinserting.

Care & Storage

Store in a dry, cool place. Wrap cord around hooks.

CAUTION! Do not store with wet filter. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs.
Brushroll not spinning	Debris wrap/belt	Clear debris from brushroll; check and replace belt if worn.
Vacuum overheats	Clog/filter	Check for clogs; clean filter; allow to cool for 60 minutes.
Canister not detaching	Release button stuck	Ensure vacuum is off; press release firmly; check for obstructions.
Unusual noise	Foreign object	Turn off and unplug; inspect brushroll, hose, and nozzle for objects.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com