Shark UVC805 Vacuum Cleaner Manual

The Shark UVC805 is a powerful upright vacuum cleaner featuring a HEPA filtration system, multi-surface brushroll, lift-away technology for above-floor cleaning, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Maintenance & Care 8. Filtration System 9. Storage & Handling 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with lift-away pod, motorized brushroll, HEPA filter, dust cup, wand, crevice tool, upholstery tool, and power cord.

Feature	Description
HEPA Filtration	Captures 99.9% of dust and allergens
Lift-Away Technology	Detachable pod for above-floor cleaning
Multi-Surface Brushroll	Automatically adjusts between carpets and hard floors
LED Headlights	Illuminates hidden debris under furniture
Large Dust Cup	Easy-empty, 1.5-quart capacity
Power Switch	Turns vacuum on/off
Brushroll Control	Enables/disables brushroll for delicate rugs
Suction Control	Adjusts suction power for different surfaces
Cord Wrap	Integrated hooks for cord storage
Wand Release	Button to detach wand for extended reach

Assembly & Setup

Unpack and inspect all components. Assemble on a flat surface.

Attach wand: Insert wand into upright body until it clicks.
Attach hose: Connect hose to pod and wand.
Install tools: Store crevice and upholstery tools on dock.
Install filters: Place HEPA filter and pre-motor filter as indicated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into a standard 120V outlet; follow operational steps.

Select surface setting: Use brushroll control for carpets or hard floors.
Adjust suction: Use suction control for high-pile rugs or delicate surfaces.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Use lift-away mode: Press release button to detach pod for stairs or furniture.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

Model: Shark UVC805.
Power: 120V, 60Hz, 12 Amps.
Filtration: HEPA filter + foam pre-motor filter.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 quarts.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.
Accessories: Crevice tool, upholstery tool, dusting brush.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, suction control, brushroll on/off. Body: Lift-away release, dust cup release, hose release.

Indicator Lights: LED headlights activate automatically; filter check light alerts when filter needs cleaning.

Settings: Suction control (MAX for carpets, MIN for hard floors), brushroll on/off (for area rugs or hard floors), lift-away mode (detach pod for handheld cleaning).

Cleaning Modes

Upright mode: For carpets and large floor areas. Lift-Away mode: Detach pod for stairs, furniture, and above-floor cleaning. Handheld mode: Use with tools for tight spaces.

Ensure vacuum is plugged in and power switch is on.
Select appropriate mode for cleaning task.
Use tools: Attach crevice tool for edges; upholstery tool for furniture.

Tip: Empty dust cup when it reaches MAX line for optimal suction.

Maintenance & Care

Regular maintenance ensures peak performance.

Empty dust cup: Press release button; empty contents into trash.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
Clear brushroll: Remove debris from brushroll; check for obstructions.
Inspect hose: Remove clogs using long, flexible object.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters.

Filtration System

Two-stage filtration: Foam pre-motor filter and sealed HEPA filter. Replace HEPA filter every 12-18 months; clean pre-motor filter monthly.

Storage & Handling

Store in a cool, dry place. Wrap cord around cord hooks. Use handle to carry; avoid dropping.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for clogs.
Brushroll not spinning	Obstruction/overheat	Clear debris from brushroll; let motor cool 45 minutes.
Vacuum won't turn on	Power cord/outlet	Check outlet; inspect cord for damage; ensure power switch is on.
Unusual noise	Foreign object in brushroll/hose	Turn off and unplug; remove object from brushroll or hose.
Filter light on	Dirty filter	Clean or replace filter as needed.

Reset: Unplug for 45 minutes to reset thermal protection.

Service: 1-800-798-7398; sharkclean.com