Shark UV700 Vacuum Cleaner Manual

The Shark UV700 is a powerful upright vacuum cleaner featuring UV-C sanitizing technology, HEPA filtration, multi-surface brushroll, lift-away canister mode, LED headlights, and advanced swivel steering. Designed for deep cleaning on carpets and hard floors while reducing allergens. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. UV-C Sanitizing Feature 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with UV-C module, lift-away pod, HEPA filter, brushroll with LED lights, swivel steering handle, power cord, and attachments.

Feature	Description
UV-C Sanitizing Technology	Emits UV-C light to reduce bacteria and allergens on surfaces
HEPA Filtration System	Captures 99.9% of dust and allergens
Lift-Away Pod	Detachable canister for above-floor cleaning
Multi-Surface Brushroll	Automatically adjusts between carpets and hard floors
LED Headlights	Illuminates dark areas under furniture
Advanced Swivel Steering	Maneuvers easily around obstacles
POWER Button	Turns vacuum and UV-C light on/off
BRUSHROLL Switch	Enables/disables brushroll rotation
SUCTION Control	Adjusts suction power (High/Low)
DUST CUP Release	Button to empty dust cup

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach handle: Insert handle into upright body until it clicks securely.
Install filters: Place pre-filter and HEPA filter into their compartments.
Attach hose and wand: Connect hose to lift-away pod and snap wand into place.
Attach cleaning tools: Store crevice tool and dusting brush on wand caddy.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll during assembly.

First-Time Use

Before first cleaning, perform a test run in an open area.

Power on: Press POWER button; ensure UV-C light illuminates (blue light).
Select surface setting: Use brushroll switch for carpets (ON) or hard floors (OFF).
Adjust suction: Set to HIGH for deep cleaning, LOW for delicate rugs.
Begin cleaning: Push vacuum forward slowly; allow brushroll to engage.
Use lift-away mode: Press release pedal to detach pod for stairs/upholstery.

CAUTION! Do not look directly at UV-C light. Keep vacuum moving during use.

Specifications

Model: Shark UV700 Upright Vacuum.
Technology: UV-C Sanitizing with HEPA filtration.
Power: 120V AC, 60Hz, 12 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Filtration: HEPA filter, foam pre-filter, felt filter.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: POWER, SUCTION control, BRUSHROLL switch. Body: DUST CUP release, LIFT-AWAY pedal, UV-C indicator light.

Indicator Lights: Blue UV-C light (sanitizing active), Red filter alert (clean/replace filter).

Settings: Suction (HIGH/LOW), Brushroll (ON/OFF), UV-C (auto-activates when head is flat on floor). Accessories: Use wand and tools for above-floor cleaning; attach to hose end.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for stairs, furniture, ceilings.

Switch to lift-away: Press pedal; lift pod from docking station.
Attach tools: Connect desired tool to hose or wand.
Clean above floor: Use suction without brushroll for delicate surfaces.
Return to dock: Align pod and press down until it clicks.

Tip: Use brushroll OFF on hard floors to prevent scattering debris.

UV-C Sanitizing Feature

UV-C light activates automatically when cleaning head is flat on floor.

Ensure UV-C window is clean and unobstructed.
Vacuum normally; blue light indicates sanitizing is active.
For maximum effect, make slow, overlapping passes.
UV-C turns off when vacuum is upright or powered off.

WARNING! UV-C light is harmful to eyes and skin. Do not stare at light or expose skin. Keep children and pets away during operation.

Care & Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty after each use.
Clean filters: Rinse pre-filter monthly; replace HEPA filter every 12 months.
Clear brushroll: Remove hair and debris weekly; press tabs to access.
Check UV-C window: Wipe with dry cloth to maintain effectiveness.
Inspect hose and attachments: Remove clogs with long object.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed. Copyright © SharkNinja Operating LLC. UV-C technology complies with FDA performance standards. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power connection; try different outlet; ensure POWER is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and tools for blockages.
Brushroll not spinning	Obstruction/setting	Clear hair/debris from brushroll; ensure brushroll switch is ON.
UV-C light not on	Head position/window	Ensure head is flat on floor; clean UV-C window; restart vacuum.
Overheating	Filter/clog	Clean filters; check for clogs; allow vacuum to cool for 60 minutes.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com