Shark UV580 Series Vacuum Cleaner Manual

The Shark UV580 Series is a powerful upright vacuum cleaner featuring UV sanitization technology, advanced multi-surface brushroll, Lift-Away capability for portable cleaning, HEPA filtration, LED headlights, and multiple cleaning modes. Designed for carpets and hard floors, it includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. UV Sanitization Feature 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, UV sanitization module, Lift-Away pod, HEPA filter, dust cup, brushroll, LED headlights, hose, and various attachments.

Feature	Description
UV Sanitization	Ultraviolet light kills germs and bacteria on surfaces
Lift-Away Technology	Detachable pod for portable cleaning above floors
Advanced Brushroll	Self-cleaning brushroll for carpets and hard floors
HEPA Filtration	Captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Multiple Cleaning Modes	Carpet, Hard Floor, and Bare Floor settings
Dust Cup Release	Easy-empty dust cup with one-touch release
Power Cord	25-foot retractable cord
Attachments Included	Crevice tool, upholstery tool, dusting brush
Wand Storage	Integrated storage for hose and wand

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install wand: Insert wand into hose connector on vacuum body.
Attach hose: Connect hose to wand and main body ports.
Install brushroll: Ensure brushroll is properly seated in floor nozzle.
Charge UV module (if required): Plug into outlet for initial charge.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug into standard 120V outlet; follow initial setup steps.

Select surface setting: Turn dial to CARPET, HARD FLOOR, or BARE FLOOR.
Turn on UV sanitization: Press UV button to activate (green light indicates on).
Begin vacuuming: Press power button; push vacuum forward on floor.
Use attachments: Detach Lift-Away pod for above-floor cleaning.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Do not look directly at UV light. Keep away from children and pets during operation.

Specifications

Model: Shark UV580 Series.
Power: 120V, 60Hz, 12 Amps.
Cord Length: 25 feet retractable.
Filtration: HEPA filter, washable.
Dust Cup Capacity: 1.5 dry quarts.
Brushroll: Self-cleaning, anti-hair wrap technology.
UV Light: Germicidal UVC wavelength.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: POWER button, UV button, surface dial. Body: Brushroll on/off, suction control, dust cup release.

Surface Dial: CARPET (for high-pile), HARD FLOOR (for wood/tile), BARE FLOOR (for delicate surfaces). Suction Control: Adjust suction power via slider on body. Brushroll Switch: Turn brushroll on/off for hard floors. UV Button: Activates UV sanitization (use on hard surfaces only).

Using Attachments

For above-floor cleaning, detach Lift-Away pod.

Press release button on back of vacuum to detach pod.
Connect desired attachment to hose end.
Use crevice tool for tight spaces, upholstery tool for furniture, dusting brush for shelves.
Reattach pod by aligning and pressing until click.

Tip: Store attachments on pod or wall mount for easy access.

Cleaning Modes

Three primary modes for different surfaces.

Carpet Mode: Brushroll spins at high speed; use for carpets and rugs.
Hard Floor Mode: Medium brushroll speed; for wood, laminate, tile.
Bare Floor Mode: Brushroll off; suction only for delicate floors.
Lift-Away Mode: Detach pod for stairs, furniture, ceilings.
UV Sanitization Mode: Activate UV light while vacuuming hard floors.

WARNING! Do not use UV mode on carpets or with brushroll active.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filter monthly: Remove HEPA filter, rinse under cold water, air dry 24 hours.
Clear brushroll: Remove hair and debris weekly.
Check UV light: Wipe with dry cloth; replace if damaged.
Inspect hose for clogs; clear if suction reduces.

CAUTION! Unplug before maintenance. Do not use wet filter.

UV Sanitization Feature

UV light kills up to 99.9% of germs on hard surfaces.

Activate only on hard floors (wood, tile, vinyl).
Green light indicates UV is on.
Move slowly over surface for effective sanitization.
Do not use on carpets, rugs, or dark surfaces.
Keep away from eyes and skin.

Note: UV feature supplements cleaning; not a substitute for disinfectants.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. UL listed for safety. Copyright © SharkNinja Operating LLC. UV feature complies with FDA guidelines for germicidal lamps. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check outlet; ensure cord fully inserted; try different outlet.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and brushroll for clogs; clean filter.
Brushroll not spinning	Obstruction/setting	Clear hair/debris; ensure brushroll switch is on; check for blockages.
UV light not working	Mode/surface	Ensure on hard floor mode; check if light needs replacement.
Overheating	Filter/clog	Clean filter; clear clogs; let vacuum cool 30 minutes.
Strange noise	Foreign object	Turn off; check for objects in hose, brushroll, or dust cup.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com