Shark UV541CCO Vacuum Cleaner Manual

The Shark UV541CCO is an upright vacuum cleaner with UV sanitizing technology, powerful suction, HEPA filtration, and multiple attachments for versatile cleaning. It features a motorized brushroll, LED headlights, a large dust cup, and various cleaning modes for carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: UV sanitizing light, motorized brushroll, HEPA filter, dust cup, hose with wand, crevice tool, dusting brush, upholstery tool.

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks into place.
2. Connect hose: Attach hose to vacuum body and wand.
3. Install filter: Place HEPA filter in filter compartment.
4. Attach tools: Store attachments on docking clips.
5. Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Before first use, charge UV light (if applicable) and perform test run.

1. Check filter: Ensure HEPA filter is properly installed.
2. Select floor setting: Use dial to choose carpet or hard floor mode.
3. Turn on UV light: Press UV button to activate sanitizing.
4. Begin cleaning: Move vacuum slowly over surfaces.
5. Empty dust cup: Press release button to remove and empty.

CAUTION! Do not use UV light on dark or reflective surfaces. Keep away from eyes.

Specifications

• Model: Shark UV541CCO.
• Power: 120V, 60Hz, 12 Amps.
• Suction Power: Adjustable with settings for carpets/hard floors.
• Filtration: HEPA filter captures 99.9% of particles.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll control, UV light button, suction adjustment.

Settings: Carpet mode (brushroll engaged), hard floor mode (brushroll disengaged), max suction (for deep cleaning). UV light: Press to activate; light indicates operation. Filter indicator: Alerts when filter needs cleaning. Cord wrap: Wrap cord around rear hooks.

Using Attachments

Attach tools for above-floor cleaning.

1. Detach wand: Press release button on handle.
2. Connect tool: Insert crevice tool, dusting brush, or upholstery tool.
3. Select suction: Use adjustment dial for appropriate power.
4. Clean: Move tool over surfaces; empty dust cup as needed.

Tip: Use dusting brush for delicate surfaces; crevice tool for tight spaces.

UV Sanitizing Feature

UV light kills germs on surfaces.

1. Activate: Press UV button; blue light indicates operation.
2. Move slowly: Pass over each area for 10-15 seconds.
3. Deactivate: Press UV button again to turn off.
4. Safety: Do not look directly at UV light; keep away from children and pets.

WARNING! UV light is for surface sanitizing only; not a substitute for cleaning.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use; press release button.
2. Clean filter: Rinse HEPA filter monthly; air dry completely.
3. Check brushroll: Remove hair and debris; press release to access.
4. Inspect hose: Clear clogs with long object.
5. Wipe exterior: Use dry cloth; avoid liquids.

CAUTION! Unplug before maintenance. Do not use water on electrical parts.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. UV light complies with FDA guidelines for consumer devices. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com