Shark UV490CCO Vacuum Cleaner Manual

The Shark UV490CCO is a powerful upright vacuum cleaner featuring UV sanitizing technology, advanced swivel steering, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, a large-capacity dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. UV Sanitizing Feature 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with motor, UV sanitizing light, Swivel steering head, Dust cup with HEPA filter, Handle with controls, Power cord, and various attachments.

Feature	Description
UV Sanitizing Light	Kills germs and bacteria on surfaces as you clean
Swivel Steering	Provides maneuverability around furniture and obstacles
HEPA Filtration System	Captures 99.9% of dust and allergens
Large Capacity Dust Cup	Easy-to-empty bin for less frequent emptying
Cleaning Mode Selector	Switch between carpet and hard floor settings
Powerful Suction Motor	Deep cleans carpets and removes embedded dirt
Attachments Included	Crevice tool, dusting brush, upholstery tool
Adjustable Handle	Fits users of different heights
LED Headlights	Illuminates dark areas under furniture
Quick-Release Wand	Converts to handheld vacuum for above-floor cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble following steps below.

Attach handle: Align handle with body and secure with provided screws.
Install dust cup: Slide dust cup into place until it clicks securely.
Insert HEPA filter: Place filter in designated compartment in dust cup.
Attach hose and wand: Connect hose to vacuum body and attach wand to hose.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure assembly is complete and area is clear of obstacles.

Select surface type: Use mode selector to choose CARPET or HARD FLOOR.
Turn on UV light: Press UV button to activate sanitizing feature.
Adjust suction power: Use power dial for desired suction level.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button and empty contents into trash.

CAUTION! Do not look directly at UV light. Keep vacuum away from water.

Specifications

Model: Shark UV490CCO Upright Vacuum.
Power: 120V AC, 60Hz, 12 Amps.
Filtration: HEPA filter captures 99.9% of particles.
Dust Cup Capacity: 1.5 liters.
Cord Length: 25 feet.
Weight: 15 lbs.
UV Light: Germicidal UV-C technology.
Warranty: 5-year limited warranty.
Attachments: Crevice tool, dusting brush, upholstery tool.

Controls and Settings

Main controls located on handle and body. Handle: POWER button, UV button, Suction power dial. Body: Mode selector (Carpet/Hard Floor), Dust cup release, Hose release.

Indicator Lights: Power ON (green), UV ON (blue), Filter check (red).

Settings: Suction power (Low/Medium/High), Cleaning mode (Carpet pile adjustment), UV timer (auto-off after 10 minutes). Maintenance: Filter reset button, Brush roll access.

Using Attachments

For above-floor cleaning: detach wand and connect desired attachment.

Turn off vacuum and unplug from outlet.
Press hose release button to detach wand.
Connect attachment to end of wand (crevice tool, dusting brush, etc.).
Plug in vacuum and turn on for handheld cleaning.
After use, turn off, unplug, and reattach wand to vacuum body.

Tip: Use crevice tool for tight spaces; dusting brush for delicate surfaces.

Cleaning Modes

Select appropriate mode for surface type.

Carpet Mode: Raises brush roll for deep carpet cleaning.
Hard Floor Mode: Lowers brush roll and reduces suction to prevent scattering debris.
Area Rug Mode: Medium suction with brush roll engaged for delicate rugs.
Manual Suction Control: Adjust power dial for specific cleaning needs.

WARNING! Do not use carpet mode on hard floors as it may cause damage.

UV Sanitizing Feature

UV light kills germs on surfaces. Press UV button to activate; blue light indicates ON.

Safety Features: Auto-off if vacuum is tilted or lifted; 10-minute timer; shield protects user from direct UV exposure.

Usage: For best results, move vacuum slowly over surface to allow UV exposure. Not a substitute for chemical disinfection.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full indicator lights.
Clean HEPA filter monthly: Remove, tap gently, rinse if washable (air dry completely).
Check brush roll monthly: Remove debris like hair and strings.
Inspect hose for clogs: Use long object to clear obstructions.
Wipe exterior with damp cloth; do not use harsh chemicals.

CAUTION! Always unplug before maintenance. Ensure filter is completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for safety. Copyright © SharkNinja Operating LLC. UV feature complies with FDA guidelines for consumer devices. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; check circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and wand for clogs; clean filter.
Brush roll not spinning	Debris/worn belt	Clear debris from brush roll; inspect and replace belt if necessary.
UV light not working	Timer/position	Ensure vacuum is upright; wait 10 minutes for timer reset.
Overheating	Clog/filter	Turn off and unplug; check for clogs; clean filter; allow to cool.
Unusual noise	Foreign object	Turn off immediately; check for objects in brush roll or hose.

Reset: Unplug for 10 minutes to reset thermal protection.

Service: 1-800-798-7398; www.sharkclean.com