Shark UV440 Vacuum Cleaner Manual

The Shark UV440 is a powerful upright vacuum cleaner featuring UV-C light sanitization technology, HEPA filtration, Lift-Away functionality for portable cleaning, Anti-Allergen Complete Seal, and a motorized brushroll for deep carpet cleaning. It includes multiple attachments for versatile cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. UV-C Sanitization Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with UV-C light module, Lift-Away pod, motorized brushroll, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, and power cord.

Feature	Description
UV-C Sanitization	Emits UV-C light to reduce germs, bacteria, and dust mites on surfaces
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	HEPA filtration traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Floor Selector Switch	Adjusts brushroll height for carpets or hard floors
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, bagless design
Attachments	Crevice tool, dusting brush, upholstery tool included
Power Cord	25-foot cord with cord wrap
Wand Release Pedal	Quickly detaches wand for above-floor cleaning

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach the handle: Insert handle into the main body until it clicks into place.
Install the wand: Insert the wand into the socket on the back of the vacuum.
Attach hose: Connect the hose to the port on the Lift-Away pod.
Attach floor nozzle: Slide the floor nozzle onto the wand until it locks.
Install filters: Place the HEPA filter and pre-motor filter into their compartments.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll and moving parts.

First-Time Use

Before first use, charge the UV-C module (if applicable) and perform a test run.

Power on: Press the power button on the handle.
Select floor type: Use the floor selector switch (CARPET/HARD FLOOR).
Test UV-C mode: Press the UV-C button to activate sanitization (ensure nozzle is flat on surface).
Empty dust cup: Ensure dust cup is empty before first use.
Check filters: Verify filters are properly installed.

CAUTION! Do not look directly at UV-C light. Keep vacuum upright during use.

Specifications

Model: Shark UV440.
Power: 120V, 60Hz, 12 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Technology: UV-C Sanitization, Lift-Away, LED headlights.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 5-year limited warranty.
Weight: 15.2 lbs.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power button, UV-C button, floor selector switch (CARPET/HARD FLOOR).

Body Features: Dust cup release button, wand release pedal, brushroll on/off switch (for hard floors), cord wrap hooks.

Settings: Power (On/Off), UV-C (On/Off - activates when nozzle is flat on surface), floor type (adjusts brushroll height), brushroll (On for carpets, Off for hard floors).

Using Attachments

For above-floor cleaning, detach the Lift-Away pod or use the wand with attachments.

Detach pod: Press the release button on the back to lift away the pod.
Attach tools: Connect crevice tool, dusting brush, or upholstery tool to the hose or wand.
Clean: Use the handle on the pod for portable cleaning of stairs, furniture, and ceilings.
Reattach: Place pod back onto the main body until it clicks.

Tip: Turn off the brushroll when using attachments on delicate surfaces.

UV-C Sanitization Mode

The UV-C light reduces microorganisms on surfaces. Use on carpets and hard floors.

Activate: Press the UV-C button on the handle (LED indicator will light).
Operation: UV-C activates only when the floor nozzle is flat on the surface and the vacuum is moving slowly.
Effectiveness: Move the vacuum slowly over each area for 2-3 seconds for optimal sanitization.
Safety: UV-C turns off automatically when the vacuum is lifted or turned off.

WARNING! Avoid direct eye exposure to UV-C light. Do not use on people or pets.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button and empty after each use.
Clean filters: Rinse HEPA and pre-motor filters every 3 months (air dry completely for 24 hours before reinstalling).
Clear brushroll: Remove hair and debris from brushroll monthly.
Check UV-C bulb: Replace UV-C bulb annually or if indicator light flashes.
Wipe exterior: Use a dry cloth to clean the vacuum body.

CAUTION! Unplug vacuum before maintenance. Do not use water on electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © SharkNinja Operating LLC. UV-C technology complies with FDA and IEC standards. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure power button is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for clogs; clean filters.
Brushroll not spinning	Obstruction/switch	Clear hair and debris from brushroll; ensure brushroll is set to ON for carpets.
UV-C light not working	Bulb/position	Ensure nozzle is flat on surface; replace UV-C bulb if indicator flashes.
Overheating	Clog/filter	Turn off and unplug; let cool for 60 minutes; check for clogs; clean filters.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com