Shark UV420 Vacuum Cleaner Manual

The Shark UV420 is a powerful upright vacuum cleaner featuring UV-C sanitizing technology, advanced swivel steering, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, a large-capacity dust cup, motorized brushroll, LED headlights, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, UV-C light module, Swivel steering head, Dust cup with HEPA filter, Handle with controls, Power cord, and various attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach the handle: Align handle with main body until it clicks into place.
2. Install the dust cup: Push firmly into the main body until securely locked.
3. Attach the hose: Connect the hose end to the port on the front of the vacuum.
4. Insert the HEPA filter: Place filter into the designated slot in the dust cup lid.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, perform a quick test to ensure all functions work properly.

1. Plug in the vacuum and press the power switch to ON.
2. Select the appropriate cleaning mode using the mode selector switch (Carpet/Hard Floor/Area Rug).
3. Test the UV-C light by pressing the UV button; a blue light indicates it's active.
4. Test the brushroll by engaging/disengaging it on a small area.
5. Empty the dust cup after initial setup to ensure optimal performance.

CAUTION! Do not look directly at the UV-C light. Keep the vacuum away from water and liquids.

Specifications

• Model: Shark UV420.
• Power Source: 120V AC, 60Hz.
• Motor Power: 12 Amps.
• Dust Cup Capacity: 2.0 liters.
• Filtration: HEPA filter, washable.
• Cord Length: 25 feet.
• Weight: 15.4 lbs.
• UV-C Light Wavelength: 254 nm.
• Warranty: 5-year limited warranty.
• Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Main controls located on the handle: Power Switch, UV-C Button, Brushroll Switch, Mode Selector.

Power Switch: Turns the main vacuum motor and UV-C light on/off. UV-C Button: Activates/deactivates the UV-C sanitizing light independently. Brushroll Switch: Engages or disengages the motorized brushroll for delicate rugs or hard floors. Mode Selector: Choose between Carpet (full suction), Hard Floor (reduced suction), and Area Rug (medium suction) modes.

Additional features: Cord wrap hooks on the back, adjustable height settings for different carpet piles, and an accessory storage caddy.

Using Attachments

Attachments allow for cleaning above floors, upholstery, and tight spaces.

1. Turn off and unplug the vacuum before changing attachments.
2. Remove the hose from its dock on the main body.
3. Connect the desired attachment to the end of the hose.
4. Plug the vacuum back in and turn it on to use the attachment.
5. Common attachments: Crevice tool (for corners), dusting brush (for shelves), upholstery tool (for sofas), pet hair tool (for pet hair removal).

Tip: Store attachments in the provided caddy to keep them organized and easily accessible.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet Mode: Use for medium to high-pile carpets. Engages brushroll and full suction power.
2. Hard Floor Mode: Use for wood, tile, or laminate. Disengages brushroll to prevent scattering debris.
3. Area Rug Mode: Use for delicate rugs or low-pile carpets. Provides medium suction with gentle brushroll action.
4. Switch modes using the selector on the handle while the vacuum is running.
5. For best results, make slow, overlapping passes in the direction of the floor grain or carpet fibers.

WARNING! Do not use the brushroll on hard floors as it may cause damage. Always turn off the vacuum before switching modes.

UV-C Sanitizing Feature

The UV-C light helps sanitize surfaces as you clean.

1. Ensure the vacuum head is in contact with the floor surface.
2. Press the UV button to activate the blue UV-C light.
3. Move the vacuum slowly over the area to allow the light to sanitize effectively.
4. For optimal sanitization, make multiple passes over the same area.
5. The UV-C light will automatically turn off if the vacuum head is lifted off the floor.

Important: The UV-C light is a supplement to cleaning, not a replacement for regular disinfecting. Avoid direct eye exposure.

Maintenance & Cleaning

Regular maintenance ensures peak performance and longevity.

1. Empty the Dust Cup: Press the release button and empty after each use or when full.
2. Clean the Filters: Rinse the HEPA filter under cold water every 3 months. Allow to dry completely for 24 hours before reinstalling.
3. Check the Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.
4. Inspect the UV-C Light: Wipe the light cover with a dry cloth. Do not use liquids.
5. Store Properly: Wrap the cord around the hooks and store in a cool, dry place.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not immerse any part in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for safety. Copyright © SharkNinja Operating LLC. UV-C technology patented. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in to reset electronic controls.

Service: 1-800-798-7398; www.sharkclean.com