Shark UV210CN Vacuum Cleaner Manual

The Shark UV210CN is a versatile upright vacuum cleaner featuring UV sanitization technology, powerful suction with multiple settings, a HEPA filtration system, motorized brushroll for carpets, swivel steering for maneuverability, multiple attachments (crevice tool, dusting brush, upholstery tool), easy-empty dust cup, and a lightweight design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. UV Sanitization Feature 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, UV sanitization module, Handle with controls, Dust cup with release latch, Hose with wand, Motorized brushroll, Swivel steering head, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
UV Sanitization	Ultraviolet light to reduce germs and allergens on surfaces
Powerful Suction	Multiple suction settings for different floor types
HEPA Filtration	Traps 99.9% of dust and allergens
Motorized Brushroll	Automatically adjusts for carpets and hard floors
Swivel Steering	360-degree maneuverability around furniture
Easy-Empty Dust Cup	One-touch release for hygienic disposal
Attachments	Crevice tool, dusting brush, upholstery tool included
POWER Button	Turns vacuum and UV light on/off
Suction Control	Adjusts suction power (Low/Medium/High)
Brushroll On/Off	Enables/disables motorized brushroll

Assembly Instructions

Unpack and inspect all contents. Assemble on a flat surface.

Attach handle: Insert handle into main body until it clicks securely.
Connect hose and wand: Insert wand into hose port; attach hose to vacuum body.
Install attachments: Store attachments on provided caddy or connect as needed.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Setup

Plug in vacuum; perform initial check.

Check filters: Ensure HEPA and pre-motor filters are properly seated.
Test suction: Turn on power; select Medium setting; verify suction.
Test UV light: Press UV button; ensure blue light illuminates (do not look directly at UV light).
Adjust settings: Use suction control and brushroll switch based on floor type.

CAUTION! Keep UV light away from eyes and skin. Do not use on wet surfaces.

Specifications

Model: Shark UV210CN Upright Vacuum.
Technology: UV-C Sanitization, HEPA Filtration.
Suction Power: Adjustable (Low/Medium/High).
Brushroll: Motorized, auto-adjusting.
Maneuverability: Swivel steering head.
Dust Cup Capacity: 1.2 liters.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Weight: 12.5 lbs.

Controls and Settings

Located on handle: POWER, Suction Control (Low/Medium/High), Brushroll On/Off, UV On/Off.

Indicator Lights: Power (Green), UV Active (Blue), Brushroll Active (Orange), Full Dust Cup (Red).

Suction Settings: Low for delicate rugs, Medium for general cleaning, High for deep cleaning. Brushroll: Enable for carpets; disable for hard floors or delicate surfaces. UV Sanitization: Activates UV-C light; requires vacuum to be moving for safety.

Using Attachments

For above-floor cleaning: detach hose/wand; connect desired attachment.

Turn off vacuum and unplug before changing attachments.
Select attachment: Crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.
Connect to wand or hose end until secure.
Turn on vacuum; adjust suction as needed.

Tip: Use lower suction settings for delicate fabrics to prevent damage.

UV Sanitization Feature

UV-C light reduces germs, bacteria, and allergens on surfaces.

Activate: Press UV button; blue light indicates activation.
Operation: Slowly move vacuum over surface; UV light only operates when vacuum is in motion.
Deactivate: Press UV button again or turn off vacuum.
Safety: Do not look directly at UV light; keep away from skin; not for use on people or pets.

WARNING! UV-C light can be harmful. Always keep vacuum moving when UV is active. Do not use on wet surfaces.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release latch; empty into trash; reinstall.
Clean filters: Remove HEPA and pre-motor filters monthly; tap gently or rinse (allow to dry completely).
Check brushroll: Remove debris (hair, threads) from brushroll regularly.
Inspect hose/wand: Clear any blockages.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinstalling.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV-C warning: This device emits UV-C radiation; follow safety instructions to avoid exposure. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure POWER button is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose/wand for blockages; clean filters.
Brushroll not spinning	Debris/switch	Turn off; remove debris from brushroll; ensure Brushroll is set to ON.
UV light not working	Safety feature	Ensure vacuum is moving; UV may not activate if stationary. Check UV button.
Overheating	Blockage/overuse	Turn off; let cool; check for clogs; clean filters; do not run continuously over 1 hour.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com