Shark UltraLight PowerFins QS700QRD Vacuum Cleaner Manual

The Shark UltraLight PowerFins QS700QRD is a lightweight, corded upright vacuum cleaner featuring PowerFins brushroll technology for deep carpet cleaning, Anti-Hair Wrap technology, LED headlights, a large-capacity dust cup with HEPA filter, multiple cleaning modes, and a versatile cleaning wand with attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Cleaning Attachments 7. Cleaning Modes & Surfaces 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with PowerFins brushroll, Handle with controls, Dust cup with HEPA filter, Cleaning wand, Crevice tool, Upholstery tool, Pet multi-tool.

Feature	Description
PowerFins Brushroll	Deep-cleaning fins that flex to grab debris from carpets
Anti-Hair Wrap Technology	Helps prevent hair and pet hair from tangling on brushroll
LED Headlights	Illuminate dark areas under furniture
Large Dust Cup	Easy-empty, 0.8-quart capacity
HEPA Filter	Captures 99.9% of dust and allergens
Cleaning Modes	Powerful suction for carpets; gentle for hard floors
Cleaning Wand	Detachable for above-floor cleaning
Attachments	Crevice tool, upholstery tool, pet multi-tool included
Power Cord	25-foot cord with cord wrap
Weight	UltraLight design at approximately 7.5 lbs

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into main body until it clicks securely.
Attach hose and wand: Connect hose to front port; attach wand to hose end.
Install dust cup: Slide dust cup into place until it locks.
Insert filter: Place HEPA filter into dust cup lid.
Plug into wall outlet: Use 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; turn on power switch.

Select surface setting: Use dial on handle for carpet or hard floor.
Begin cleaning: Push vacuum forward and back slowly for best results.
Use attachments: Detach wand and attach tools for above-floor cleaning.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark UltraLight PowerFins QS700QRD.
Type: Corded upright vacuum cleaner.
Suction Power: Powerful motor with adjustable settings.
Brushroll: PowerFins technology with Anti-Hair Wrap.
Dust Cup Capacity: 0.8 quarts.
Filtration: HEPA filter captures 99.9% of particles.
Cord Length: 25 feet.
Weight: Approximately 7.5 lbs.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: Power switch, Surface dial (Carpet/Hard Floor), Wand release button.

Main body: Dust cup release, Brushroll access, Hose port, Cord wrap.

Surface settings: CARPET for deep cleaning; HARD FLOOR for gentle suction. Power switch: ON/OFF. Wand release: Press to detach wand for above-floor cleaning. Brushroll access: Flip vacuum over to remove brushroll for maintenance.

Using Cleaning Attachments

Attach tools to wand for specialized cleaning.

Detach wand: Press wand release button on handle.
Attach tool: Insert crevice, upholstery, or pet tool into wand end.
Clean: Use tool on furniture, stairs, corners, or pet hair.
Return: Reattach wand to vacuum when done.

Tip: Use pet multi-tool for removing pet hair from upholstery and stairs.

Cleaning Modes & Surfaces

Adjust settings based on floor type.

Carpets: Set dial to CARPET; PowerFins brushroll engages for deep cleaning.
Hard floors: Set dial to HARD FLOOR; brushroll stops spinning to prevent scattering debris.
Above floors: Use wand with attachments for furniture, blinds, ceilings.
Stairs: Detach wand and use handheld mode with appropriate tool.

WARNING! Do not use on wet surfaces. Keep vacuum on floor during use.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filter: Rinse HEPA filter every 3 months; air dry completely.
Check brushroll: Remove hair or debris monthly.
Inspect hose: Clear any blockages.
Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is ON.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and wand for blockages; clean filter.
Brushroll not spinning	Hair wrap/obstruction	Unplug; remove brushroll and clear hair/debris; reinstall properly.
Vacuum is noisy	Blockage/loose part	Check for obstructions; ensure all parts are securely attached.
Dust cup not sealing	Misaligned/full	Remove and reinsert dust cup; ensure it's empty and clean.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com