Shark UltraLight PowerFins QS700QBL Vacuum Cleaner Manual

The Shark UltraLight PowerFins QS700QBL is a lightweight, corded upright vacuum cleaner featuring PowerFins brushroll technology for deep carpet cleaning, Anti-Allergen Complete Seal Technology with HEPA filter, LED headlights, a large-capacity dust cup, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Filter Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with PowerFins brushroll, Handle with controls, Dust cup with release button, Hose with wand, Cleaning attachments, Power cord with wrap.

Feature	Description
PowerFins Brushroll	Rotating fins for deep carpet cleaning and hair removal
Anti-Allergen Complete Seal	Sealed system with HEPA filter captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Easy-empty, no-touch dust cup with 1.2-quart capacity
Cleaning Modes	Upright, Handheld, and Above-Floor modes
Attachments	Crevice tool, dusting brush, pet multi-tool included
Power Cord	25-foot cord with wrap for extended reach
Weight	UltraLight design under 10 lbs
Brushroll Shutoff	Automatically stops brushroll on hard floors
Washable Filters	Both pre-motor and HEPA filters are washable

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Connect hose: Attach hose to the front of the vacuum; ensure secure connection.
Install wand: Insert wand into hose until it locks.
Attach cleaning tools: Store tools on wand caddy or handle.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll area.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use CARPET/HARD FLOOR switch for appropriate setting.
Turn on power: Press power button on handle.
Adjust suction: Use SUCTION CONTROL slider if needed for delicate rugs.
Use attachments: Press release button to convert to handheld mode.
Empty dust cup: When full indicator lights up, empty before continuing.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord away from heated surfaces.

Specifications

Model: Shark UltraLight PowerFins QS700QBL
Power: Corded, 120V, 60Hz
Weight: 9.8 lbs
Cord Length: 25 feet
Dust Cup Capacity: 1.2 quarts
Filtration: Anti-Allergen Complete Seal with HEPA filter
Brushroll: PowerFins technology with automatic shutoff
Attachments: Crevice tool, dusting brush, pet multi-tool
Warranty: 5-year limited warranty
Operating Noise: ≤75 dB

Controls and Settings

Handle controls: POWER button, SUCTION CONTROL slider, CARPET/HARD FLOOR switch.

Indicator Lights: Power ON (blue), Full Dust Cup (red), Brushroll Active (green).

Mode Selection: Upright mode for floors; press handheld release button for above-floor cleaning. Suction Control: Adjust for delicate rugs or maximum cleaning. Brushroll Control: Automatically stops on hard floors; manual override available.

Cleaning Modes & Attachments

Three cleaning modes: Upright, Handheld, and Above-Floor.

Upright Mode: For carpets and large floor areas.
Handheld Mode: Press release button to detach pod; use for stairs, furniture.
Above-Floor Mode: Attach tools to wand for ceilings, blinds, upholstery.
Attachments: Crevice tool (tight spaces), dusting brush (surfaces), pet multi-tool (hair removal).

Tip: Store attachments on wand caddy for easy access during cleaning.

Emptying the Dust Cup

Empty when full indicator lights or after each use.

Turn off and unplug vacuum.
Press dust cup release button; lift cup away from vacuum.
Hold over trash; press bottom release to open door.
Tap gently to remove debris; close door securely.
Reattach dust cup until it clicks.

WARNING! Do not operate with full dust cup. Empty outdoors if possible to reduce dust.

Filter Maintenance

Wash filters every 3 months for optimal performance.

Remove filters: Turn off vacuum; remove dust cup. Access pre-motor and HEPA filters.
Rinse: Use cold water only; no detergents. Rinse until water runs clear.
Dry: Air dry completely for 24 hours before reinstalling.
Reinstall: Ensure filters are completely dry and properly seated.

CAUTION! Never operate vacuum without filters. Wet filters will damage motor.

Care & Storage

Unplug before maintenance. Store in dry area.

Clean brushroll: Remove hair and debris monthly. Check for blockages in hose and wand. Wrap cord around cord hooks. Store upright or hang using handle hook.

CAUTION! Do not store with wet filters. Keep away from children and pets.

Regulatory Information

UL Listed; complies with U.S. safety standards. Copyright © SharkNinja Operating LLC. All trademarks owned by SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/plug	Check outlet; ensure plug is secure; try different outlet.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and brushroll for blockages.
Brushroll not spinning	Mode setting/hair wrap	Ensure in CARPET mode; clean hair from brushroll ends.
Overheating	Clogged filters	Turn off; let cool. Clean filters and check for blockages.
Dust cup won't latch	Misaligned/overfull	Empty completely; align properly and press until click.

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com