Shark UltraLight PowerFins QS700HBK Vacuum Cleaner Manual

The Shark UltraLight PowerFins QS700HBK is a lightweight, corded upright vacuum cleaner featuring PowerFins technology for deep carpet cleaning, Anti-Allergen Complete Seal Technology, LED headlights, a large-capacity dust cup, and a versatile cleaning wand with attachments. It is designed for cleaning carpets, hard floors, and above-floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight upright body, PowerFins brushroll, LED headlights, Anti-Allergen Complete Seal dust cup, cleaning wand, crevice tool, dusting brush, and upholstery tool.

FeatureDescription
PowerFins TechnologyRotating fins for deep carpet cleaning and debris pickup
Anti-Allergen Complete SealSeals in 99.9% of dust and allergens
LED HeadlightsIlluminates dark areas under furniture
Large-Capacity Dust CupEasy-empty, bagless dust cup
Cleaning WandLocks into place for above-floor cleaning
AttachmentsCrevice tool, dusting brush, upholstery tool included
ON/OFF SwitchPowers the vacuum on and off
Brushroll On/OffSwitch to turn brushroll on for carpets or off for hard floors
Cord HookBuilt-in cord wrap for storage
Handle ReleaseButton to recline handle for under-furniture cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the handle: Insert the handle into the main body until it clicks into place.
  2. Install the wand: Insert the cleaning wand into the rear port until secure.
  3. Attach tools: Store crevice tool, dusting brush, and upholstery tool on the dock.
  4. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in the vacuum; ensure all parts are securely attached.

  1. Select floor type: Use brushroll ON for carpets; OFF for hard floors.
  2. Adjust height: The vacuum auto-adjusts to carpet pile height.
  3. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
  4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord clear of brushroll.

Specifications

Controls and Settings

Main controls located on the handle and body.

Handle: ON/OFF switch, brushroll ON/OFF button, handle release button.

Settings: Brushroll ON for carpets (activates PowerFins); Brushroll OFF for hard floors and area rugs. LED headlights turn on automatically when vacuum is powered. Cord wrap on rear for storage.

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, and tight spaces.

  1. Remove the wand: Press the wand release button and pull out.
  2. Attach tool: Insert desired tool into the end of the wand.
  3. Select suction mode: Brushroll automatically turns off when wand is detached.
  4. Clean: Use tool for targeted cleaning.
  5. Return wand: Reinsert until it clicks.

Tip: Use the dusting brush for delicate surfaces and the crevice tool for edges.

Cleaning Modes

Two primary modes: Floor cleaning and above-floor cleaning.

  1. Floor mode: Handle upright, brushroll ON for carpets, OFF for hard floors.
  2. Above-floor mode: Detach wand, attach tool, use for stairs, furniture, etc.
  3. Under furniture: Recline handle using release button to clean low spaces.
  4. LED lights: Automatically illuminate dark areas.

WARNING! Do not use vacuum to pick up sharp objects, which may damage the brushroll or dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button; empty when full.
  2. Clean filters: Wash foam and felt filters every 3 months (air dry completely).
  3. Check brushroll: Remove debris wrapped around brushroll regularly.
  4. Inspect hose and wand: Clear any clogs.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord not plugged inPlug into outlet; check circuit breaker.
Loss of suctionFull dust cup or clogEmpty dust cup; check hose, wand, and filters for blockages.
Brushroll not spinningBrushroll OFF mode or debrisTurn brushroll ON; remove debris wrapped around brushroll.
Vacuum is noisyObstruction in airwayTurn off, unplug, and check for clogs in hose, wand, or inlet.
LED lights not workingBulb issueContact customer service for replacement.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com

Shark UltraLight PowerFins QS700HBK Vacuum Cleaner Manual © - All Rights Reserved 2025