Shark UltraLight POWERFINS HZ600 Series Vacuum Cleaner Manual

The Shark UltraLight POWERFINS HZ600 Series is a lightweight, corded upright vacuum cleaner featuring POWERFINS floor nozzle technology, Anti-Hair Wrap brushroll, LED headlights, a large-capacity dust cup with advanced cyclonic filtration, multiple cleaning modes (Carpet, Hard Floor, Bare Floor), and a versatile cleaning wand with attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: POWERFINS floor nozzle, Anti-Hair Wrap brushroll, LED headlights, dust cup with HEPA filter, cleaning wand, upholstery tool, crevice tool, dusting brush.

Feature	Description
POWERFINS floor nozzle	Deep-cleaning fins that flex to remove debris from carpets
Anti-Hair Wrap brushroll	Prevents hair tangles for easier maintenance
LED headlights	Illuminates dark areas under furniture
Large-capacity dust cup	Easy-to-empty bin with advanced cyclonic action
HEPA filter	Captures 99.9% of dust and allergens
Cleaning wand	Extends for above-floor cleaning
Upholstery tool	For furniture and stairs
Crevice tool	For tight spaces and edges
Dusting brush	For delicate surfaces and dusting
Power switch	Turns vacuum on/off

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

Attach handle: Insert handle into body until it clicks into place.
Install wand: Insert wand into handle socket; ensure secure connection.
Attach floor nozzle: Connect nozzle to wand or handle as needed.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow these steps for optimal performance.

Select cleaning mode: Use mode selector (Carpet, Hard Floor, Bare Floor) on floor nozzle.
Adjust height: For carpets, ensure nozzle adjusts automatically or manually.
Empty dust cup: Ensure dust cup is empty before first use.
Check filters: Verify HEPA filter is properly installed.

CAUTION! Keep cord away from heat sources and moving parts.

Specifications

Model Series: HZ600 Series.
Type: Corded upright vacuum.
Weight: UltraLight design (under 10 lbs).
Filtration: HEPA filter with sealed system.
Dust Cup Capacity: 1.0 dry quarts.
Cord Length: 25 feet.
Nozzle Features: POWERFINS, Anti-Hair Wrap, LED lights.
Attachments: Wand, upholstery tool, crevice tool, dusting brush.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty.

Controls and Settings

Power switch on handle. Mode selector on floor nozzle (Carpet, Hard Floor, Bare Floor).

Handle controls: Power switch, wand release button, suction control (if applicable).

Floor nozzle: Mode selector, brushroll on/off switch for bare floors. Dust cup: Empty button, filter access latch. Attachments: Quick-release connectors for easy swapping.

Using Attachments

For above-floor cleaning: detach wand and attach tools.

Turn off vacuum and unplug before changing attachments.
Detach wand: Press release button on handle.
Attach tool: Insert tool into wand end until it clicks.
Select appropriate tool for surface (upholstery, crevices, dusting).

Tip: Store attachments on dock or holder for easy access.

Cleaning Modes

Three modes for different floor types.

Carpet mode: Activates brushroll for deep cleaning.
Hard Floor mode: Reduces brushroll speed for hard surfaces.
Bare Floor mode: Turns off brushroll for delicate floors.
Switch modes using selector on floor nozzle.
Use LED lights to see debris in dark areas.

WARNING! Do not use on wet surfaces. Keep hair and loose clothing away from brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use. Clean filters monthly: rinse HEPA filter under cold water, air dry 24 hours. Check brushroll for debris; remove hair wrap as needed. Inspect nozzle for blockages.

CAUTION! Unplug before maintenance. Do not use damaged filters or parts.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check for clogs in hose, nozzle, or wand.
Brushroll not spinning	Hair wrap/blockage	Turn off, unplug, and remove debris from brushroll.
Vacuum won't turn on	Power cord/outlet	Check power outlet; ensure cord is plugged in securely.
LED lights not working	Connection/switch	Ensure floor nozzle is properly connected; check mode selector.
Dust cup not emptying	Filter blockage	Remove and clean HEPA filter; ensure it is dry before reinserting.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com