Shark UltraLight PowerFins HairPro QS700H Vacuum Cleaner Manual

The Shark UltraLight PowerFins HairPro QS700H is a lightweight, corded upright vacuum cleaner featuring PowerFins brushroll technology that self-cleans as it picks up hair and debris, Anti-Allergen Complete Seal Technology with HEPA filter, LED headlights, a 30-foot power cord, and a versatile cleaning wand with attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with PowerFins brushroll, Handle with controls, 30-foot power cord, Cleaning wand, Upholstery tool, Crevice tool, Dusting brush, and HEPA filter.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Install cleaning wand: Slide wand into holder on back of vacuum.
3. Attach hose: Connect hose to port on front of vacuum.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

1. Select surface setting: Use brushroll control for carpets (ON) or hard floors (OFF).
2. Power on: Press ON/OFF switch on handle.
3. Adjust height: Vacuum automatically adjusts to carpet height.
4. Empty dust cup: Press release button to empty after first use.

CAUTION! Keep cord away from brushroll and moving parts. Do not use on wet surfaces.

Specifications

• Model: Shark UltraLight PowerFins HairPro QS700H.
• Technology: PowerFins brushroll, Anti-Allergen Complete Seal.
• Filtration: HEPA filter captures 99.9% of dust and allergens.
• Cord Length: 30 feet.
• Weight: 9.8 lbs.
• Attachments: Cleaning wand, upholstery tool, crevice tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and main body. Handle: ON/OFF switch, brushroll control. Main body: Dust cup release, hose release.

Brushroll Settings: ON for carpets (activates PowerFins), OFF for hard floors or delicate rugs. LED lights automatically turn on when vacuum is powered.

Height Adjustment: Automatic based on carpet pile. Dust Cup: Empty when full indicator appears. Filter: Washable HEPA filter located behind dust cup.

Using Attachments

Attach tools for above-floor cleaning: Upholstery tool, crevice tool, dusting brush.

1. Turn off vacuum and unplug before changing attachments.
2. Remove wand from back holder.
3. Insert desired tool into end of wand.
4. Select brushroll OFF setting for hard surfaces.

Tip: Use crevice tool for tight spaces; dusting brush for delicate surfaces.

Cleaning Modes

Supports floor cleaning, above-floor cleaning, and detailed cleaning with attachments.

1. Floor cleaning: Use vacuum in upright position with brushroll ON for carpets.
2. Above-floor cleaning: Attach wand and tool; hold vacuum hose.
3. Stair cleaning: Use handheld mode with hose and tool attached.
4. Furniture cleaning: Use upholstery tool with brushroll OFF.

WARNING! Do not vacuum large objects that may clog brushroll. Keep hair and loose clothing away from intake.

Maintenance & Care

Regular maintenance ensures optimal performance. Unplug before all maintenance.

1. Empty dust cup: Press release button over trash can.
2. Clean filter: Remove HEPA filter, rinse with cold water every month, air dry 24 hours.
3. Check brushroll: Remove debris from PowerFins; clear any hair wrap.
4. Inspect hose: Remove clogs with long object.

CAUTION! Do not use damaged cord. Ensure filter is completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com