Shark Ultimate Roadster V1315 Vacuum Cleaner Manual

The Shark Ultimate Roadster V1315 is a powerful, lightweight stick vacuum cleaner designed for quick and efficient cleaning on various floor surfaces. It features a motorized brush roll, multiple suction settings, a detachable handheld unit, a washable filter, and a long-lasting lithium-ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Battery & Charging 9. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motorized brush roll, Detachable handheld unit, Charging dock, Crevice tool, Dusting brush, Washable filter, LED headlights.

FeatureDescription
Motorized Brush RollDeep cleans carpets and hard floors
Detachable Handheld UnitConverts to a portable vacuum for above-floor cleaning
Multiple Suction SettingsAdjust power for different surfaces (Low/Medium/High)
LED HeadlightsIlluminates dark areas under furniture
Washable FilterReusable filter for easy maintenance
Lithium-Ion BatteryProvides up to 40 minutes of runtime
Crevice ToolFor tight spaces and corners
Dusting BrushFor delicate surfaces and dusting
Charging DockWall-mountable for convenient storage and charging
POWER ButtonTurns vacuum on/off; cycles through suction settings

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the handle: Insert the handle into the main body until it clicks securely.
  2. Install the brush roll: Ensure it is properly seated and free of obstructions.
  3. Attach the dust cup: Align and push until it locks into place.
  4. Mount the charging dock: Use included screws to mount on wall near outlet.
  5. Place vacuum on dock: Align charging contacts; ensure it is charging (LED indicator on).

WARNING! Ensure vacuum is turned off and unplugged from charger during assembly. Keep fingers away from brush roll.

First-Time Use

Fully charge the battery before first use.

  1. Charge: Place vacuum on charging dock; charge until indicator shows full (approx. 4 hours).
  2. Select surface setting: Use POWER button to choose appropriate suction (Low for hard floors, High for carpets).
  3. Begin cleaning: Press POWER to start; move vacuum forward and back in overlapping strokes.
  4. Empty dust cup: Press release button to remove and empty when full.
  5. Use attachments: Detach handheld unit and connect crevice tool or dusting brush as needed.

CAUTION! Do not use on wet surfaces. Keep hair, strings, and cords away from brush roll.

Specifications

Controls and Settings

Main controls located on handle. POWER Button: Press to turn on/off; press repeatedly to cycle through Low, Medium, High suction. Battery Indicator LED: Shows charge status (Red=Charging, Green=Full/Ready, Flashing Red=Low). Brush Roll On/Off: Separate button to disable brush roll for hard floors.

Handheld Unit: Detach by pressing release button; use same POWER control. Attachments: Press release to swap tools.

Cleaning Modes & Attachments

Three modes: Floor cleaning with motorized brush, Above-floor cleaning with handheld unit, Spot cleaning with attachments.

  1. For carpets: Use High suction with brush roll on.
  2. For hard floors: Use Low suction; consider turning brush roll off.
  3. For upholstery: Use handheld unit with dusting brush.
  4. For crevices: Use handheld unit with crevice tool.
  5. For ceilings/corners: Extend handheld unit; use appropriate attachment.

Tip: Regularly empty dust cup to maintain suction power.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filter monthly: Remove, rinse under cold water, air dry 24 hours completely before reinstalling.
  3. Clear brush roll weekly: Remove hair and debris wrapped around roll.
  4. Check for blockages: Inspect hose and air pathways if suction decreases.
  5. Wipe exterior: Use dry cloth; do not use liquids or cleaners.

WARNING! Always turn off and remove from charger before maintenance. Do not operate with wet filter.

Battery & Charging

Lithium-ion battery provides cordless convenience.

CAUTION! Use only provided charging dock. Do not expose battery to extreme temperatures or fire.

Storage & Care

Store on charging dock or in dry, cool place. Keep attachments in designated holder.

CAUTION! Do not store with battery fully depleted. Keep away from children and pets.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not chargingPlace on charger; ensure contacts are clean; check outlet.
Loss of suctionFull dust cup/clogged filterEmpty dust cup; clean filter; check for blockages in hose.
Brush roll not spinningObstruction/hair wrapTurn off, remove debris from brush roll; ensure it is properly installed.
Battery not holding chargeOld battery/extreme temperaturesEnsure proper charging; replace battery if needed (contact support).
Handheld unit not detachingRelease button stuckTurn off; press release firmly while pulling unit away.

Reset: Turn off, remove from charger, wait 10 seconds, then place back on charger.

Service: 1-800-798-7398; www.sharkclean.com

Shark Ultimate Roadster V1315 Vacuum Cleaner Manual © - All Rights Reserved 2025