Shark TURBO STICK VAC EP600 Vacuum Cleaner Manual

The Shark TURBO STICK VAC EP600 is a lightweight, corded stick vacuum cleaner featuring powerful suction with TURBO mode, a motorized brushroll for deep carpet cleaning and hard floor pickup, a swivel steering head for easy maneuverability, a 2-in-1 dusting and crevice tool, a washable filter, and a floor nozzle with brushroll on/off control. Ideal for quick cleanups and full-floor cleaning sessions. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Maintenance & Cleaning 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Lightweight stick body, Motorized floor nozzle with brushroll, Swivel steering, TURBO power button, 2-in-1 dusting/crevice tool, Washable foam and felt filter, Cord wrap hooks, Easy-empty dust cup.

Feature	Description
Motorized Brushroll	Deep cleans carpets and picks up debris on hard floors
TURBO Power Mode	Boosts suction for embedded dirt and high-pile carpets
Swivel Steering	Allows easy maneuvering around furniture and obstacles
2-in-1 Dusting & Crevice Tool	Attaches to handle for above-floor cleaning
Brushroll On/Off Switch	Disengages brushroll for delicate rugs or hard floors
Washable Filter	Foam and felt filter can be rinsed and reused
Easy-Empty Dust Cup	One-touch release for quick debris disposal
Cord Wrap Hooks	Integrated hooks for neat cord storage
Lightweight Design	Easy to carry up and down stairs
On-Board Tool Caddy	Stores 2-in-1 tool on vacuum body

Assembly & Setup

Unpack all parts from box. Ensure all components are present.

Attach handle: Insert handle into top of vacuum body until it clicks securely.
Attach floor nozzle: Align nozzle with bottom of vacuum body and push until it locks.
Install filter: Place washable foam and felt filter into filter compartment at back.
Attach 2-in-1 tool: Clip onto onboard caddy or connect to handle for use.
Wrap power cord: Use cord wrap hooks for storage; plug into standard 120V outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Plug in power cord; turn on power switch.

Select floor type: Use brushroll on/off switch—ON for carpets, OFF for hard floors/rugs.
Engage TURBO mode: Press TURBO button for extra suction on high-pile carpets.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: Detach 2-in-1 tool for upholstery, ceilings, and tight spaces.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: TURBO STICK VAC EP600.
Power Source: Corded, 120V, 60Hz.
Suction Power: Standard and TURBO boost mode.
Floor Nozzle: Motorized brushroll with on/off control.
Maneuverability: Swivel steering head.
Filter System: Washable foam and felt filter.
Dust Cup Capacity: 0.7 dry quarts.
Cord Length: 25 feet.
Weight: 7.5 lbs.
Warranty: 5-year limited warranty.

Controls and Functions

Main power switch on handle. TURBO button for boost suction. Brushroll on/off switch on floor nozzle.

Handle Controls: Power ON/OFF, TURBO button, Cord release pedal.

Floor Nozzle: Brushroll on/off switch, headlight (on select models), swivel joint. Dust Cup: Release button, empty door latch. Filter Access: Rear cover release button.

Cleaning Modes & Attachments

Carpet Mode: Brushroll ON. Hard Floor Mode: Brushroll OFF. Above-Floor: Use 2-in-1 tool.

Turn off and unplug vacuum before changing attachments.
For carpets: Ensure brushroll is ON; use TURBO mode for deep cleaning.
For hard floors: Switch brushroll OFF to prevent scattering debris.
Attach 2-in-1 tool: Connect to handle for dusting shelves, blinds, vents, and crevices.

Tip: Empty dust cup when it reaches MAX line for optimal suction.

Emptying the Dust Cup

Empty after each use or when dust cup is full.

Turn off and unplug vacuum.
Press dust cup release button and lift cup off body.
Hold over trash can; press empty door latch to open bottom.
Tap gently to remove debris; close door securely.
Reattach dust cup until it clicks into place.

WARNING! Do not use vacuum with full dust cup—reduces suction and can overheat motor.

Maintenance & Cleaning

Regular maintenance ensures peak performance.

Filter: Rinse foam and felt filter every 3 months under cold water; air dry 24 hours before reuse.
Brushroll: Remove hair and threads monthly; press release tabs to remove brushroll for cleaning.
Check for blockages: Inspect hose, nozzle, and dust cup path if suction decreases.
Wipe exterior: Use dry cloth; no liquids or cleaners on electrical parts.

CAUTION! Never use vacuum without filter. Ensure all parts are completely dry before reassembly.

Safety Information

Read all instructions before use. Keep away from children. Do not use to pick up liquids, burning materials, or sharp objects. Unplug before maintenance. Do not use with damaged cord or plug. Store indoors in dry place.

Warranty & Support

5-year limited warranty from date of purchase. Warranty covers defects in materials/workmanship under normal household use. For warranty service, contact Shark Customer Service at 1-800-798-7398 or visit sharkclean.com. Register product online for faster service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	No power/defective outlet	Check outlet; ensure plug is secure; try different outlet.
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filter; check for blockages in hose and nozzle.
Brushroll not spinning	Switch off/obstruction	Ensure brushroll switch is ON; remove debris wrapped around brushroll.
Vacuum overheats	Blockage/full dust cup	Turn off; unplug; let cool; clear blockage; empty dust cup.
Unusual noise	Foreign object in brushroll or hose	Turn off; inspect brushroll and hose; remove object.

Reset: Unplug for 60 minutes if motor overheats; plug back in.

Service: 1-800-798-7398; sharkclean.com