Shark TAPCLEAN EP035 Vacuum Cleaner Manual

The Shark TAPCLEAN EP035 is a versatile and powerful vacuum cleaner designed for efficient cleaning on various surfaces. It features advanced suction technology, multiple cleaning modes, a HEPA filtration system, washable dust cup, LED headlights, and a lightweight, ergonomic design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Filtration System 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motor unit with advanced suction, Washable Dust Cup, HEPA Filter, LED Headlights, Crevice Tool, Upholstery Tool, Power Cord, and various cleaning modes.

Feature	Description
Advanced Suction Motor	Provides powerful cleaning on carpets and hard floors
HEPA Filtration	Captures 99.9% of dust and allergens
Washable Dust Cup	Easy to empty and clean
LED Headlights	Illuminates dark areas under furniture
Crevice Tool	For tight spaces and corners
Upholstery Tool	For cleaning sofas, chairs, and stairs
Power Switch	Turns vacuum on/off
Mode Selector	Switches between carpet and hard floor settings
Cord Wrap	For neat storage of power cord
Handle Release	Allows for compact storage

Assembly & Setup

Unpack and inspect all contents. Assemble according to instructions.

Attach handle: Insert handle into main body until it clicks into place.
Attach floor nozzle: Connect floor nozzle to the handle or hose as directed.
Install dust cup: Slide dust cup into place until it locks.
Insert HEPA filter: Place filter into the designated slot.
Plug into AC power.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure assembly is complete and filter is installed.

Select cleaning mode: Use mode selector for carpet or hard floor.
Adjust suction: Use power dial if available for different surfaces.
Begin cleaning: Turn on power switch and move vacuum slowly over surface.
Empty dust cup: When full, turn off vacuum and empty dust cup.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Avoid vacuuming cords.

Specifications

Model: Shark TAPCLEAN EP035.
Power: 120V AC, 60Hz.
Suction Power: Adjustable with advanced motor technology.
Filtration: HEPA filter captures 99.9% of particles.
Dust Cup Capacity: 0.8 liters (washable).
Cord Length: 25 feet.
Weight: 10 lbs.
Noise Level: < 75 dB.
Attachments: Crevice tool, upholstery tool, dusting brush.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Power Switch: Turns vacuum on/off. Mode Selector: Choose between carpet mode (for deep cleaning) and hard floor mode (for gentle suction). Suction Control: Adjust suction power for different surfaces. LED Headlights: Automatically turn on when vacuum is powered.

Additional Features: Cord wrap for easy storage, handle release for compact storage, and washable dust cup indicator.

Cleaning Modes & Attachments

Use appropriate mode and attachment for best results.

Carpet Mode: Use for deep cleaning carpets and rugs.
Hard Floor Mode: Use for hard surfaces like wood, tile, or laminate.
Crevice Tool: For corners, edges, and tight spaces.
Upholstery Tool: For sofas, chairs, and car interiors.
Dusting Brush: For delicate surfaces and dusting.

Tip: Always turn off vacuum before changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: When full or after each use.
Clean filter: Wash HEPA filter every 3 months or as needed.
Check brush roll: Remove hair and debris from brush roll regularly.
Inspect hose: Ensure hose is clear of blockages.
Store properly: Use cord wrap and store in a dry place.

WARNING! Unplug vacuum before performing any maintenance.

Filtration System

HEPA filter captures 99.9% of dust, pollen, and allergens.

Remove filter: Open filter compartment and take out HEPA filter.
Wash filter: Runder cold water and let air dry for 24 hours.
Reinstall filter: Ensure filter is completely dry before reinstalling.

Note: Do not use vacuum without filter installed.

Care & Storage

Unplug and clean after each use. Store in a cool, dry place.

CAUTION! Do not store vacuum with wet filter. Avoid exposure to extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord not plugged in	Ensure power cord is securely plugged into outlet.
Loss of suction	Full dust cup or clogged filter	Empty dust cup; clean filter; check for blockages in hose.
Brush roll not spinning	Debris wrapped around brush roll	Turn off vacuum and remove debris from brush roll.
Overheating	Blocked airflow	Turn off vacuum, unplug, and check for clogs; let cool for 30 minutes.
Unusual noise	Foreign object in hose or brush roll	Turn off and inspect hose and brush roll for obstructions.

Reset: Unplug vacuum for 10 minutes, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com