Shark SV800UKL Vacuum Cleaner Manual

The Shark SV800UKL is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large dust cup capacity, multiple cleaning modes, and a versatile lift-away design. It is designed for deep cleaning on both carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Cleaning Attachments 7. Maintenance & Care 8. Emptying the Dust Cup 9. Cleaning the Filters 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean brushroll, LED headlights, Dust Cup with release button, Handle with controls, Hose, Wand, and various cleaning attachments.

FeatureDescription
DuoClean TechnologyDual brushrolls for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Lift-Away DesignDetachable pod for portable above-floor cleaning
Large Dust CupEasy-empty, no-touch dust cup
Cleaning ModesSettings for carpets, hard floors, and delicate rugs
Power ButtonTurns vacuum on/off
Brushroll ControlEngages/disengages brushroll for different surfaces
Handle ReleaseButton to detach the lift-away pod
Attachment HolderStores crevice tool and dusting brush on board

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the handle: Align the handle with the main body and push until it clicks into place.
  2. Connect the hose: Insert the hose end into the port on the front of the vacuum until secure.
  3. Attach the wand: Insert the wand into the hose grip until it clicks.
  4. Install cleaning tools: Clip the crevice tool and dusting brush into the onboard holder.
  5. Plug into a standard electrical outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in the vacuum and familiarize yourself with the controls.

  1. Select floor setting: Use the brushroll switch to select CARPET or HARD FLOOR.
  2. Power on: Press the POWER button on the handle.
  3. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
  4. Use lift-away mode: Press the handle release button to detach the pod for stairs or furniture.
  5. Attach tools: Remove the wand and attach the desired tool for above-floor cleaning.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Keep hair and loose clothing away from the brushroll.

Specifications

Controls and Settings

Main controls located on the handle and body.

Handle: POWER button, Brushroll switch (CARPET/HARD FLOOR/OFF), Handle Release button.

Body: Dust Cup Release button, Hose release latch, Cord wrap hooks.

Cleaning Modes: Use brushroll switch for appropriate surface. For delicate rugs, turn brushroll OFF. LED lights automatically illuminate when vacuum is powered on. Lift-Away: Press release button to detach pod; reattach by aligning and pressing down until it clicks.

Using Cleaning Attachments

For above-floor cleaning: Detach the pod or use the hose and wand.

  1. Detach the wand from the hose grip.
  2. Choose an attachment: Crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.
  3. Insert the attachment into the end of the wand or hose.
  4. Power on the vacuum and begin cleaning.

Tip: For high reach, fully extend the wand. Store attachments on the onboard holder when not in use.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Check and clear brushroll: Regularly remove hair and string wrapped around the brushroll.
  2. Inspect hose and wand: Ensure no blockages are present.
  3. Check wheels and swivel: Wipe clean if debris is stuck.
  4. Store properly: Wrap cord around hooks and store in a dry place.

WARNING! Always unplug the vacuum before performing any maintenance.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

  1. Hold the vacuum over a trash can.
  2. Press the DUST CUP RELEASE button to detach the cup.
  3. Push the bottom door open to empty contents. Avoid touching debris.
  4. Close the door and reattach the dust cup until it clicks.

CAUTION! Do not operate the vacuum with an overfull dust cup.

Cleaning the Filters

Clean filters every 3 months for best performance.

  1. Unplug the vacuum and remove the dust cup.
  2. Locate the foam and felt filters behind the dust cup compartment.
  3. Rinse filters under lukewarm water until water runs clear. Do not use soap.
  4. Air dry filters completely for at least 24 hours before reinstalling.
  5. Check the HEPA filter annually; replace if damaged or excessively dirty.

IMPORTANT: Never operate the vacuum without all filters installed and completely dry.

Regulatory Information

This appliance complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. Dispose of the product in accordance with local electronic waste regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck if plugged in; test outlet; check household fuse/circuit breaker.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose, wand, and inlet for blockages; clean filters.
Brushroll not spinningMode setting/obstructionEnsure brushroll switch is set to CARPET or HARD FLOOR; clear any wrapped debris from brushroll ends.
Vacuum is noisyObstruction in airwayTurn off and unplug. Check for blockages in hose, wand, or inlet.
Lift-Away pod won't detachRelease button not fully pressedPress the handle release button firmly while lifting the pod.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com

Shark SV800UKL Vacuum Cleaner Manual © - All Rights Reserved 2025