Shark SV780SP_N 14 Vacuum Cleaner Manual

The Shark SV780SP_N 14 is a powerful upright vacuum cleaner featuring a 14-inch cleaning path, advanced swivel steering for maneuverability, Lift-Away functionality for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, DuoClean floor nozzle for carpets and hard floors, LED headlights, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with dust cup, motorized floor nozzle, Lift-Away pod, wand, hose, and accessory storage.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach the handle: Insert handle into upright body until it clicks into place.
2. Install the floor nozzle: Align nozzle with the base and push until it locks.
3. Connect the hose: Attach hose to the pod and secure the wand.
4. Store accessories: Place crevice tool and dusting brush in built-in caddy.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

1. Select floor setting: Use suction control for carpets (high) or hard floors (low).
2. Turn on: Press power switch; LED lights will illuminate.
3. Begin cleaning: Push vacuum forward and back in overlapping strokes.
4. Use Lift-Away: Press release button to detach pod for stairs or furniture.
5. Empty dust cup: Press release button when full and empty into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brush rolls.

Specifications

• Model: Shark SV780SP_N 14.
• Cleaning Path: 14 inches.
• Technology: DuoClean, Anti-Allergen Complete Seal with HEPA filter.
• Features: Lift-Away, LED headlights, swivel steering.
• Attachments: Crevice tool, dusting brush, upholstery tool (varies by model).
• Power Cord: 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, suction control slider, wand release button.

Body: Lift-Away release button, dust cup release, hose connector.

Settings: Suction control (High for carpets, Low for hard floors). Power (On/Off). Lift-Away mode (Upright or Portable). Accessory selection (attach tools to wand or hose).

Using Attachments

For above-floor cleaning: detach pod or use hose and wand.

1. Detach pod: Press Lift-Away release button.
2. Attach tool: Connect crevice tool, dusting brush, or upholstery tool to wand or hose end.
3. Clean: Use tool on furniture, stairs, blinds, or tight spaces.
4. Return to upright: Reattach pod until it clicks.

Tip: Store attachments in built-in caddy when not in use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full or after each use.
2. Clean filters: Remove and rinse HEPA filter and pre-motor filter every 3 months (air dry completely).
3. Clear brush rolls: Remove debris from floor nozzle brush rolls regularly.
4. Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
5. Inspect power cord: Ensure cord is undamaged.

WARNING! Unplug vacuum before maintenance. Do not use wet filters.

Storage & Care

Store in a cool, dry place. Wrap cord around hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com