Shark SV775 Vacuum Cleaner Manual

The Shark SV775 is a versatile upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a powerful motor, advanced brushroll technology, multiple height adjustments, a large-capacity dust cup, HEPA filtration, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Height adjustment lever, Dust cup with release button, HEPA filter, Power cord, Handle with controls, Attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into handle socket; ensure it locks.
3. Attach hose: Connect hose to wand and body ports.
4. Attach tools: Clip crevice tool, dusting brush, and upholstery tool to handle.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow operational steps.

1. Select floor setting: Adjust height lever based on floor type (lowest for bare floors, higher for carpets).
2. Turn on: Press power switch on handle.
3. Engage brushroll: Ensure brushroll is ON for carpets; turn OFF for hard floors.
4. Begin vacuuming: Push vacuum forward and back in overlapping strokes.
5. Empty dust cup: Press release button when full; empty into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

• Model: Shark SV775.
• Type: Upright vacuum cleaner.
• Power: 120V, 60Hz, 10 Amps.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filtration: HEPA filter (washable).
• Brushroll: Motorized with anti-hair wrap technology.
• Height Settings: 5 positions.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15 lbs.

Controls and Settings

Handle controls: Power switch, Brushroll on/off button. Body controls: Height adjustment lever, Dust cup release, Wand release button.

Settings: Height adjustment (1-5 for floor types), Brushroll on/off (for carpets vs. hard floors).

Operation: Power on, adjust height, engage brushroll as needed. For above-floor cleaning: Detach wand, attach desired tool to hose end.

Using Attachments

For above-floor cleaning: Detach wand, attach tool to hose end.

1. Crevice tool: For tight spaces, corners, and along edges.
2. Dusting brush: For delicate surfaces, blinds, and shelves.
3. Upholstery tool: For sofas, chairs, and stairs.

Tip: Ensure vacuum is on and brushroll is OFF when using attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filter: Remove HEPA filter monthly; rinse with water, air dry completely.
3. Clear brushroll: Remove debris and hair from brushroll weekly.
4. Check hose/wand: Remove clogs if suction reduces.
5. Inspect belt: Replace if brushroll does not spin (consult manual).

WARNING! Unplug vacuum before maintenance. Do not operate with wet filter.

Storage & Care

Store in cool, dry place. Wrap cord around hooks. Ensure dust cup is empty and filter is dry before storage.

CAUTION! Do not store near heat sources. Keep out of reach of children.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com