Shark SV7729N Vacuum Cleaner Manual

The Shark SV7729N is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brushroll, advanced swivel steering, HEPA filtration, and a large-capacity dust cup. Designed for carpets and hard floors, it includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum body, motorized floor nozzle, swivel steering handle, dust cup with HEPA filter, crevice tool, dusting brush, upholstery tool.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install floor nozzle: Connect nozzle to vacuum body, ensuring it locks in place.
3. Attach hose: Connect hose to port on vacuum body.
4. Insert filter: Place HEPA filter into dust cup compartment.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, perform a quick test to ensure proper operation.

1. Check filter: Ensure HEPA filter is properly seated in dust cup.
2. Adjust height: Set brushroll height appropriate for your floor type.
3. Test suction: Turn on vacuum and verify suction power.
4. Test attachments: Connect each attachment to ensure secure fit.
5. Empty dust cup: Ensure dust cup is empty before first use.

CAUTION! Do not vacuum large debris or liquids. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark SV7729N Upright Vacuum.
• Power: 120V AC, 60Hz, 12 Amps.
• Suction Power: Adjustable via power settings.
• Filtration: HEPA filter system.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.
• Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll control, suction adjustment. Body: Height adjustment lever, dust cup release button.

Settings: Power (On/Off), Brushroll (On/Off for hard floors), Suction (High/Medium/Low), Height (Low/Medium/High for carpets).

Indicator lights: Filter check (red when filter needs cleaning), Brushroll jam (flashes if obstruction detected).

Using Attachments

Attachments stored on vacuum body. Connect to hose end for above-floor cleaning.

1. Crevice tool: For tight spaces, corners, and edges.
2. Dusting brush: For delicate surfaces, blinds, and shelves.
3. Upholstery tool: For furniture, stairs, and car interiors.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Supports multiple cleaning modes for different surfaces.

1. Carpet mode: Brushroll engaged, height adjusted for carpet pile.
2. Hard floor mode: Brushroll disengaged to prevent scattering debris.
3. Above-floor mode: Use attachments for furniture and edges.
4. Spot cleaning: Use concentrated suction for small areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects that could damage brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filter: Rinse HEPA filter every 3 months; air dry completely.
3. Check brushroll: Remove tangled hair and debris monthly.
4. Inspect hose: Clear any blockages.
5. Store properly: Wrap cord, store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes if vacuum overheats.

Service: 1-800-798-7398; www.sharkclean.com