Shark SV7728C Vacuum Cleaner Manual

The Shark SV7728C is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brush roll, advanced swivel steering, a large-capacity dust cup with easy-empty technology, HEPA filtration, multiple cleaning modes (carpet, hard floor, above-floor), and a variety of attachments for comprehensive home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brush roll, Swivel steering head, Dust cup with release button, Handle with controls, Hose and wand, On-board accessory holder, Power cord, and various attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Install the hose and wand: Connect the wand to the hose port, then attach the hose to the back of the vacuum.
3. Mount accessories: Place the crevice tool and dusting brush into the on-board holder.
4. Check filters: Ensure both the pre-motor and post-motor HEPA filters are properly seated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in the power cord and select the appropriate cleaning mode.

1. Select floor type: Use the brush roll switch to select "Carpet" or "Hard Floor".
2. Adjust height (if applicable): Some models have automatic height adjustment.
3. Begin cleaning: Press the power button on the handle and push vacuum forward.
4. Empty dust cup: When full, press the release button to detach and empty into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

• Model: Shark SV7728C Upright Vacuum.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.2 dry quarts.
• Filtration: HEPA filter system.
• Cleaning Path Width: 12 inches.
• Weight: 14.5 lbs.
• Attachments Included: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle and body. Handle: POWER button, Brush Roll ON/OFF switch. Body: Dust Cup Release, Hose Release, Cleaning Mode Selector (Carpet/Hard Floor).

LED Indicators: Power On, Brush Roll Active, Full Dust Cup alert.

Settings: Brush Roll control (On/Off for carpets vs. bare floors), Suction power (standard/max), Height adjustment (automatic on some surfaces). Maintenance: Filter reset indicator, Washable filter reminders.

Using Attachments

For above-floor cleaning: detach hose and wand, connect desired tool.

1. Turn off vacuum and detach wand from body.
2. Connect hose to wand, then attach tool (crevice, brush, etc.).
3. Turn power back on and clean stairs, upholstery, or ceilings.
4. Return to upright mode by reattaching wand to body.

Tip: Use the upholstery tool for sofas, the crevice tool for tight spaces, and the dusting brush for delicate surfaces.

Cleaning Modes & Techniques

Optimize cleaning for different surfaces.

1. Carpet Mode: Brush roll on for deep cleaning; use slow, overlapping passes.
2. Hard Floor Mode: Brush roll off to prevent scattering debris.
3. Above-Floor Mode: Use hose and attachments for furniture, stairs, blinds.
4. High-Pile Carpet: Ensure height adjuster is set correctly to prevent bogging down.
5. Edges and Corners: Use crevice tool attachment.

WARNING! Do not run vacuum over its own power cord. Avoid vacuuming sharp objects that could damage brush roll or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use or when full indicator lights.
2. Clean brush roll monthly: Remove tangled hair and fibers.
3. Wash filters every 3 months: Rinse with water, air dry completely for 24 hours before reinstalling.
4. Check for clogs: Inspect hose, wand, and air passages if suction decreases.
5. Inspect belt (if applicable): Replace if worn or cracked.

CAUTION! Always unplug vacuum before performing any maintenance. Do not use damaged filters.

Safety Information

Read all instructions before use. Keep vacuum away from water and wet surfaces. Do not use outdoors. Unplug when not in use, before servicing, or changing accessories. Do not pick up flammable materials, liquids, or sharp objects. Keep hair, loose clothing, fingers, and feet away from moving parts.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. SHARK is a registered trademark of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com