Shark SV7728 Vacuum Cleaner Manual

The Shark SV7728 is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Lift-Away capability for portable cleaning, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a multi-surface brush roll. It is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Lift-Away pod, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, brush roll on/off switch, and hose with attachments.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Lift-Away Mode	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Seals in dust and allergens; includes HEPA filter
LED Headlights	Illuminates dark areas under furniture
Brush Roll On/Off Switch	Allows cleaning of delicate rugs and hard floors
Multi-Surface Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Cord	25-foot cord with cord wrap
Dust Cup Release	Easy-empty dust cup with one-touch release
Handle Controls	Power switch and suction settings on handle
Wand Release	Quick-release wand for extended reach

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into body until it clicks into place.
Install wand: Insert wand into hose connector until secure.
Attach floor nozzle: Connect nozzle to wand or pod as needed.
Install filters: Place pre-motor and HEPA filters in their compartments.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor setting: Use brush roll on/off switch for hard floors or carpets.
Adjust suction: Use handle controls for MAX or normal suction.
Begin cleaning: Push vacuum forward and back slowly for deep cleaning.
Use attachments: Detach wand and attach tools for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark SV7728.
Technology: DuoClean with Anti-Allergen Complete Seal.
Filtration: HEPA filter captures 99.9% of dust and allergens.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Handle: Power switch, suction control (MAX/NORMAL). Floor nozzle: Brush roll on/off switch. Body: Lift-Away release button, dust cup release.

Settings: MAX suction for deep cleaning; NORMAL for everyday. Brush roll ON for carpets; OFF for hard floors and delicate rugs. Lift-Away mode for stairs and furniture.

Cleaning Modes

Upright mode: For floor cleaning. Lift-Away mode: Detach pod for portable cleaning.

Switch to Lift-Away: Press release button on body.
Use attachments: Connect tools to hose for detailed cleaning.
Return to upright: Reattach pod until it clicks.

Tip: Use MAX suction on high-pile carpets; use brush roll off on hard floors to avoid scattering debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full.
Clean filters: Rinse pre-motor and HEPA filters monthly; air dry 24 hours.
Clear brush roll: Remove debris from brush roll regularly.
Check hose and attachments: Remove clogs if suction decreases.
Store properly: Wrap cord; store in dry area.

WARNING! Unplug before maintenance. Do not use damaged filters or parts.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and nozzle for blockages.
Brush roll not spinning	Debris wrap or switch off	Clear debris from brush roll; ensure brush roll switch is ON.
Vacuum won't turn on	Power cord or outlet issue	Check power cord connection; try different outlet.
Overheating	Clogged filter or full dust cup	Clean filters; empty dust cup; allow vacuum to cool.
Strange noise	Foreign object in brush roll or hose	Turn off and unplug; inspect and remove object.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com