Shark SV7728-FS Series Vacuum Cleaner Manual

The Shark SV7728-FS Series is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brushroll, advanced swivel steering, a large-capacity dust cup, HEPA filtration, and various attachments for comprehensive cleaning. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Swivel steering handle, Dust cup with empty-release button, HEPA filter, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat surface.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into handle socket; ensure it locks.
3. Attach hose: Connect hose to wand and body ports.
4. Install filters: Place pre-motor and HEPA filters as indicated.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow initial setup steps.

1. Check filters: Ensure both filters are properly seated.
2. Select floor setting: Use power/suction control for carpet or hard floor.
3. Test brushroll: Turn brushroll on/off to ensure proper engagement.
4. Empty dust cup: Ensure dust cup is empty before first use.
5. Practice steering: Use swivel steering to maneuver around obstacles.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll during operation.

Specifications

• Model Series: SV7728-FS.
• Power Source: 120V AC, 60Hz.
• Suction Power: Adjustable, high-performance motor.
• Filtration: HEPA filter, washable pre-motor filter.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Weight: 15 lbs.
• Warranty: Limited 5-year warranty.

Controls and Settings

All controls located on handle for easy access. Handle: POWER switch, SUCTION CONTROL (Low/High), BRUSHROLL ON/OFF, WAND RELEASE.

Indicator Lights: LED for power and filter check. Dust Cup: EMPTY button, release latch. Settings: Suction control for carpets (High) and delicate rugs (Low); brushroll off for hard floors.

Using Attachments

For above-floor cleaning: detach wand, attach tools.

1. Turn off vacuum and unplug.
2. Press WAND RELEASE to detach wand.
3. Attach desired tool: Crevice tool for tight spaces; upholstery tool for furniture; dusting brush for surfaces.
4. Reattach wand to handle for extended reach.
5. Plug in and select appropriate suction setting.

Tip: Store attachments on dock or holder when not in use.

Cleaning Modes

Supports multiple floor types and cleaning needs.

1. Carpet mode: High suction, brushroll on.
2. Hard floor mode: Low suction, brushroll off (or on for agitation).
3. Above-floor mode: Use attachments with wand detached.
4. Spot cleaning: Use hose with upholstery tool for small areas.
5. Under furniture: Utilize swivel steering and LED lights.

WARNING! Do not vacuum wet surfaces, liquids, or sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press EMPTY button; empty when full or after each use.
2. Clean filters: Wash pre-motor filter monthly; replace HEPA filter every 12 months.
3. Check brushroll: Remove hair and debris; ensure free rotation.
4. Inspect hose and wand: Clear any blockages.
5. Store properly: Wrap cord, store attachments, keep in dry area.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com