Shark SV75Z N 14 Series Vacuum Cleaner Manual

The Shark SV75Z N 14 Series is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, an extendable wand, various attachments for above-floor cleaning, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, HEPA filter, Dust cup with easy-empty mechanism, Power switch, Cord rewind, Handle with controls, Extendable wand, Crevice tool, Dusting brush, Upholstery tool.

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Install wand: Insert wand into handle socket and lock in place.
3. Attach hose: Connect hose to wand and main unit.
4. Attach floor nozzle: Click floor nozzle onto the main body.
5. Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure assembly is complete and area is clear of obstacles.

1. Select cleaning mode: Use handle controls to choose carpet or hard floor setting.
2. Adjust suction: Set suction power appropriate for surface.
3. Empty dust cup: Ensure dust cup is empty before starting.
4. Check filters: Verify HEPA filter is properly installed.
5. Begin cleaning: Turn on power switch and push vacuum forward.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord away from brushroll.

Specifications

• Model: Shark SV75Z N 14 Series.
• Type: Upright vacuum cleaner.
• Filtration: HEPA filter.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Cleaning Modes: Carpet, Hard Floor, Bare Floor.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 15 lbs.

Controls and Settings

Power Switch: On/Off. Handle Controls: Suction power adjustment, Brushroll on/off for carpets vs. hard floors. Cord Rewind Button: Retracts cord automatically.

Settings: Carpet Mode (brushroll on), Hard Floor Mode (brushroll off), Suction Power (High/Medium/Low).

Maintenance Indicators: Filter check light, Dust cup full indicator.

Using Attachments

For above-floor cleaning: detach wand and attach desired tool.

1. Turn off vacuum and unplug from outlet.
2. Detach wand from main body.
3. Attach crevice tool, dusting brush, or upholstery tool to wand.
4. Plug in and turn on vacuum to use attachment.

Tip: Use upholstery tool for furniture and stairs; crevice tool for corners and edges.

Cleaning Modes

Adjust settings based on floor type for optimal cleaning.

1. Carpet Mode: Brushroll on for deep cleaning; use high suction.
2. Hard Floor Mode: Brushroll off to prevent scattering debris; use medium suction.
3. Bare Floor Setting: For delicate surfaces; use low suction.
4. Adjust suction power via handle controls as needed.

WARNING! Do not use carpet mode on hard floors as it may damage surface.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup: Press release button and empty after each use.
2. Clean filters: Rinse HEPA filter monthly; allow to dry completely before reinserting.
3. Check brushroll: Remove hair and debris from brushroll regularly.
4. Inspect hose and attachments: Clear any clogs.
5. Store properly: Use cord rewind; store in dry area.

CAUTION! Unplug before maintenance. Do not use water on electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com