Shark SV745 Vacuum Cleaner Manual

The Shark SV745 is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes (carpet, hard floor, above-floor), a detachable canister for portable cleaning, a motorized brushroll, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Care 8. Filtration System 9. Storage & Handling 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with motorized brushroll, detachable pod, LED headlights, HEPA filter, dust cup, hose, and cleaning attachments.

Feature	Description
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
HEPA Filtration	Captures 99.9% of dust and allergens
Detachable Pod	Converts to a portable canister for above-floor cleaning
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-to-empty, no bags required
Carpet/Hard Floor Mode	Automatic adjustment for different surfaces
Cleaning Wand	Extendable metal tube for high reach
Crevice Tool	For tight spaces and corners
Upholstery Tool	For sofas, chairs, and stairs
Dusting Brush	For delicate surfaces and dusting

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks securely.
Install hose: Connect hose to pod and secure clips.
Attach wand: Insert metal wand into hose cuff.
Attach cleaning tools: Store tools on onboard caddies or connect as needed.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Power on: Press foot pedal or power button on handle.
Select surface setting: Use dial or button for carpet or hard floor.
Begin vacuuming: Push vacuum forward on floor; brushroll will engage automatically.
Use attachments: Detach pod, connect wand and desired tool for above-floor cleaning.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark SV745.
Power: 120V, 60Hz, 12 Amps.
Suction Power: Powerful motor with sealed suction technology.
Filtration: HEPA filter, washable foam filter.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Weight: 15 lbs.
Warranty: 5-year limited warranty.
Operating Temp: 40°F to 104°F.

Controls and Settings

Main controls located on handle and foot pedal.

Handle: Power button, suction control slider, hose release button.

Foot Pedal: On/off pedal, brushroll on/off switch, height adjustment dial (for carpets).

Settings: Carpet mode (brushroll on), Hard floor mode (brushroll off), Above-floor mode (detached pod). Suction control: MAX for deep cleaning, MIN for delicate rugs. Height adjustment: Adjust dial for low, medium, high-pile carpets.

Cleaning Modes & Attachments

Use appropriate mode and tool for each cleaning task.

Upright mode: For carpets and large floor areas.
Detachable pod mode: For stairs, upholstery, ceilings, and under furniture.
Attachments: Connect crevice tool, dusting brush, or upholstery tool to wand.
Brushroll on/off: Turn off for hard floors or delicate rugs.

Tip: Use the upholstery tool for fabric surfaces and the crevice tool for edges and corners.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Clean filters: Remove and rinse HEPA and foam filters monthly (air dry completely).
Clear brushroll: Remove hair and debris from brushroll weekly.
Check hose and attachments for clogs.
Inspect power cord for damage.

WARNING! Always unplug vacuum before maintenance. Do not operate with wet filters.

Filtration System

HEPA filtration captures allergens; washable filters save money.

Filters: Pre-motor foam filter, post-motor HEPA filter. Cleaning: Rinse under cold water; air dry for 24 hours before reinstalling. Replacement: Replace HEPA filter every 12-18 months under normal use.

Storage & Handling

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep vacuum upright to prevent damage.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and tools for blockages.
Brushroll not spinning	Obstruction/overheat	Clear hair and debris from brushroll; let motor cool if overheated.
Vacuum shuts off	Clog/overheating	Check for clogs; clean filters; wait 45 minutes to cool down.
Unusual noise	Foreign object in brushroll or hose	Turn off and inspect brushroll, hose, and attachments for obstructions.
Poor pickup on carpets	Height setting incorrect	Adjust height dial to match carpet pile.

Reset: Unplug for 45 minutes to reset thermal protector.

Service: 1-800-798-7398; sharkclean.com