Shark SV736R Vacuum Cleaner Manual

The Shark SV736R is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister for above-floor cleaning, an Anti-Allergen Complete Seal with HEPA filter, a motorized brushroll for carpets and hard floors, LED headlights, and a variety of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with Lift-Away canister, Handle with controls, Motorized floor nozzle, HEPA filter system, Dust cup, Hose, and various attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks securely.
2. Connect hose: Attach hose to the port on the front of the vacuum.
3. Install wand: Insert metal wand into hose grip.
4. Attach floor nozzle: Connect nozzle to the bottom of the upright body.
5. Insert filters: Place pre-motor and post-motor HEPA filters into their compartments.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in power cord; ensure all parts are securely connected.

1. Select floor setting: Use brushroll switch for carpets (ON) or hard floors (OFF).
2. Adjust suction: Turn suction control on handle for desired power.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark SV736R.
• Type: Upright with Lift-Away canister.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, auto-adjusting for carpets/hard floors.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Suction control, Brushroll on/off. Body: Wand release, Lift-Away release, Dust cup release.

Settings: Brushroll ON for carpets; OFF for hard floors or delicate rugs. Suction control: MAX for deep cleaning, MIN for light debris. Lift-Away mode: Detach canister for stairs and above-floor cleaning.

Using Attachments

Attachments connect to wand or hose for specialized cleaning.

1. Detach wand: Press wand release button and pull out.
2. Choose attachment: Select crevice tool, dusting brush, or pet multi-tool.
3. Connect: Insert attachment into end of wand or hose.
4. Clean: Use for furniture, stairs, corners, and ceilings.

Tip: Ensure attachment clicks securely into place before use.

Lift-Away Mode

Allows portable cleaning of stairs, furniture, and above-floor areas.

1. Detach canister: Press Lift-Away release button on body.
2. Carry canister: Use handle to carry detached unit.
3. Clean: Use wand and attachments as needed.
4. Reattach: Place canister back onto upright body until it clicks.

WARNING! Ensure canister is securely attached before upright vacuuming.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filters: Rinse pre-motor and HEPA filters monthly; air dry 24 hours.
3. Clear brushroll: Remove debris from brushroll regularly.
4. Check hose/wand: Remove clogs if suction is reduced.

CAUTION! Unplug vacuum before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com