Shark SV736N Vacuum Cleaner Manual

The Shark SV736N is an upright vacuum cleaner featuring powerful suction, a multi-surface brush roll, Lift-Away technology for portable cleaning, HEPA filtration, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with Lift-Away pod, motorized brush roll, HEPA filter, dust cup, hose, wand, and cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks into place.
2. Install wand: Insert wand into hose connector until secure.
3. Attach hose: Connect hose to pod and wand assembly.
4. Install filters: Place HEPA filter and pre-motor filter as indicated.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

1. Select cleaning mode: Choose upright or Lift-Away mode based on cleaning needs.
2. Adjust settings: Set brush roll and suction control for your floor type.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

• Model: Shark SV736N Upright Vacuum.
• Technology: Lift-Away, Multi-Surface Brush Roll.
• Filtration: HEPA filter, washable pre-motor filter.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls on handle and body. Handle: Power switch, suction control, brush roll on/off. Body: Dust cup release, hose release, mode selector.

Settings Overview: Power (On/Off), Suction (High/Low), Brush Roll (On/Off for carpets/delicate rugs), Mode (Upright/Lift-Away).

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for stairs, furniture, and above-floor cleaning. LED Lights: Automatically illuminate in dark areas.

Cleaning Modes

Upright Mode: Use for carpets and hard floors. Lift-Away Mode: Use for stairs, upholstery, and tight spaces.

1. Switch to desired mode using mode selector.
2. For above-floor cleaning: Detach pod, attach desired tool to hose.
3. For deep cleaning: Use high suction setting and brush roll on.
4. For delicate rugs: Turn brush roll off.

Tip: Clear area of large debris before vacuuming to prevent clogs.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use or when full.
2. Clean filters monthly: Rinse HEPA and pre-motor filters under water; air dry 24 hours.
3. Check brush roll: Remove tangled hair and debris regularly.
4. Inspect hose and wand for clogs; clear if necessary.
5. Wipe exterior with dry cloth.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters.

Filtration System

HEPA filtration captures 99.9% of dust and allergens. System includes washable pre-motor filter and HEPA filter.

Filter Replacement: Replace HEPA filter every 12-18 months depending on use. Wash pre-motor filter monthly.

Storage & Handling

Store in cool, dry place. Wrap cord around hooks. Secure attachments in holder.

CAUTION! Do not store vacuum with wet filters. Avoid storing in damp areas.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com