Shark SV736K Vacuum Cleaner Manual

The Shark SV736K is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister for portable cleaning above the floor, a HEPA filter system for allergen capture, multiple brushroll settings for different floor types, LED headlights for visibility, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright body with Lift-Away canister, motorized floor nozzle, HEPA filter, dust cup, hose, wand, and accessory tools.

Feature	Description
Lift-Away Canister	Detachable for portable cleaning above floors
Powerful Suction	Advanced motor technology for deep cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Brushroll Settings	Adjustable for carpets, hard floors, and delicate rugs
LED Headlights	Illuminate dark areas under furniture
Large Dust Cup	Easy-to-empty, no bags required
Accessory Storage	On-board caddy for tools
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors
Height Adjustment	Multiple settings for different carpet piles

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach the handle: Insert into upright body until it clicks securely.
Connect the hose: Attach to the port on the front of the vacuum.
Install the wand: Insert into the hose handle until locked.
Attach floor nozzle: Slide onto the wand until it clicks.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep cord clear of moving parts.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

Check filters: Ensure HEPA and pre-motor filters are in place.
Select floor setting: Adjust brushroll and height for your floor type.
Power on: Press the power switch; LED lights will illuminate.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
Use Lift-Away mode: Press release button to detach canister for stairs or above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark SV736K Upright Vacuum.
Power Source: 120V AC, 60Hz.
Suction Power: Advanced motor with sealed suction technology.
Filtration: HEPA filter with anti-allergen seal.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments Included: Crevice tool, dusting brush, upholstery tool, pet hair tool.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, hose release button.

Body: Height adjustment lever, dust cup release, filter access door.

Settings: Brushroll on (for carpets), Brushroll off (for hard floors), Height adjustment (Low/Medium/High for carpet pile), Suction control (via accessory selection).

Using Attachments

For above-floor cleaning, detach canister or use hose and wand.

Detach canister: Press release button and lift away.
Select tool: Attach crevice tool, dusting brush, or upholstery tool to wand.
Clean: Use tool on furniture, stairs, blinds, or tight spaces.
Return: Store tools in on-board caddy.

Tip: For pet hair, use the motorized pet hair tool on upholstery.

Cleaning Modes

Upright mode: For large carpeted or hard floor areas. Lift-Away mode: Detach canister for portable cleaning.

Upright: Use on floors with handle attached.
Lift-Away: Press release, carry canister to clean stairs, under tables, or shelves.
Above-floor: Use hose and attachments with canister detached or placed on floor.
Brushroll settings: Turn off for hard floors to prevent scattering debris.

WARNING! Do not use vacuum to pick up sharp objects that could damage hose or dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
Check brushroll: Remove hair and debris from brushroll regularly.
Inspect hose: Clear clogs if suction reduces.
Store properly: Wrap cord around hooks; store in dry area.

CAUTION! Unplug vacuum before maintenance. Do not operate with wet filters.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Obstruction or belt	Turn off, unplug, and remove debris from brushroll; check belt.
Vacuum won't turn on	Power source or switch	Check outlet and cord; ensure power switch is pressed.
Overheating	Clogged filter or full dust cup	Clean filters; empty dust cup; let vacuum cool 60 minutes.
Canister not detaching	Release button not fully pressed	Press release button firmly while lifting canister.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com