Shark SV729 Vacuum Cleaner Manual

The Shark SV729 is a versatile upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large dust cup, and multiple attachments for above-floor cleaning. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and warranty information to ensure optimal performance and longevity of your vacuum.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, Handle with controls, Dust cup with release button, Hose and wand, Attachments (crevice tool, dusting brush, pet multi-tool), Power cord with wrap.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-to-empty, bagless design
Power Switch	Turns vacuum on/off
Brush Roll Control	Enables/disables motorized brush roll for delicate rugs
Handle Release	Allows vacuum to recline for under-furniture cleaning
Hose Release	Quickly detaches hose for above-floor cleaning
Attachment Holder	Stores tools on the vacuum body
Cord Wrap	Secures power cord when not in use

Assembly Instructions

Unpack all parts from the box. Ensure all components are present.

Attach the handle: Align the handle with the body until it clicks into place.
Connect the hose: Insert the hose end into the port on the front of the vacuum until secure.
Attach the wand: Insert the wand into the hose grip until it locks.
Install attachments: Store tools on the attachment holder or connect as needed.
Unwrap the power cord: Fully extend the cord from the cord wrap.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Setup

Before first use, perform these steps to ensure proper operation.

Check filters: Remove and inspect the pre-motor and post-motor filters. Reinstall securely.
Test suction: Plug in the vacuum, turn on power, and verify suction at the floor nozzle.
Adjust height: For carpets, ensure the nozzle automatically adjusts; for hard floors, use the hard floor setting if available.
Familiarize with controls: Locate the power switch, brush roll control, and handle release.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Model: Shark SV729.
Type: Upright vacuum cleaner with cord.
Technology: DuoClean, Anti-Allergen Complete Seal.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, pet multi-tool.
Filters: Washable pre-motor and post-motor HEPA filter.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.

Controls and Settings

Located on the handle and body for easy access during cleaning.

Handle Controls: Power switch, Brush roll on/off button.

Body Features: Handle release lever, Hose release button, Dust cup release button, Cord wrap hooks.

Settings: Brush roll control (On for carpets, Off for delicate rugs/hard floors), Suction power (single speed), Handle position (upright for storage, reclined for cleaning).

Using Attachments

For above-floor cleaning: furniture, stairs, ceilings, and tight spaces.

Detach the hose: Press the hose release button and pull the hose from the vacuum body.
Attach the wand: Insert the wand into the hose grip.
Choose a tool: Connect the crevice tool, dusting brush, or pet multi-tool to the wand end.
Clean: Turn on the vacuum and guide the tool over surfaces.
Reattach: Return the hose to the body port after use.

Tip: Use the pet multi-tool for removing pet hair from upholstery and stairs.

Cleaning Modes

Adapts to different floor types and cleaning needs.

Carpet mode: Brush roll on (default). The nozzle automatically adjusts height for deep carpet cleaning.
Hard floor mode: Brush roll on. The soft roller captures large debris and fine dust.
Delicate rug mode: Turn brush roll off to prevent fringe damage.
Above-floor mode: Use hose and attachments for furniture, drapes, and ceilings.

WARNING! Do not vacuum hard objects (coins, paper clips) that may damage the brush roll or motor.

Maintenance & Care

Regular maintenance ensures peak performance and extends vacuum life.

Empty dust cup: Press release button, remove cup, empty into trash. Clean filters: Remove pre-motor and post-motor filters monthly; rinse with water and air dry completely before reinstalling. Check brush roll: Regularly remove hair and debris wrapped around the brush roll. Inspect hose and attachments: Clear clogs if suction decreases. Store properly: Wrap cord, store upright in a dry location.

CAUTION! Always unplug before maintenance. Ensure filters are completely dry before reinserting.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Ensure plug is securely in outlet; check household circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinning	Obstruction/switch	Turn off, unplug, and remove debris from brush roll; ensure brush roll switch is ON.
Vacuum overheats	Clog/filter	Turn off, unplug, and let cool. Check for clogs; clean or replace filters.
Dust escaping	Filter not installed	Ensure all filters are correctly installed and dry.

Reset: Unplug for 60 minutes if motor overheats, then restart.

Service: 1-800-798-7398; sharkclean.com