Shark SV725 Vacuum Cleaner Manual

The Shark SV725 is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering for maneuverability, multiple floor settings, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean brush roll, Anti-Allergen Complete Seal filtration, LED headlights, large dust cup, swivel steering handle, floor selector switch, hose and wand assembly.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into hose port until it locks.
3. Attach hose: Connect hose to wand and body ports.
4. Install attachments: Store on-board caddy for easy access.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before cleaning, perform initial setup.

1. Check floor setting: Set selector to appropriate floor type (carpet/hard floor).
2. Empty dust cup: Ensure dust cup is empty before use.
3. Check filters: Verify filters are clean and properly installed.
4. Test operation: Plug in, turn on, and verify suction and brush roll operation.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

• Model: Shark SV725 Upright Vacuum.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Filtration: HEPA filter captures 99.9% of dust and allergens.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: POWER button, floor selector switch (Carpet/Hard Floor), brush roll on/off switch.

Body: Hose release button, dust cup release latch, wand release button.

Operation: Select floor type, turn on power, adjust brush roll as needed. Use hose release for above-floor cleaning. Empty dust cup when full indicator lights.

Using Attachments

Attachments enhance cleaning versatility.

1. Detach wand: Press hose release button and pull wand out.
2. Select attachment: Connect crevice tool, dusting brush, or upholstery tool to wand.
3. Clean: Use for tight spaces, furniture, curtains, and ceilings.
4. Reattach: Return wand to upright position until it clicks.

Tip: Store attachments on caddy when not in use.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet mode: Set selector to CARPET for deep cleaning.
2. Hard floor mode: Set selector to HARD FLOOR for gentle suction.
3. Brush roll off: Disable brush roll for delicate rugs or hard floors.
4. Above-floor cleaning: Use hose and attachments for furniture and stairs.

WARNING! Do not vacuum wet spills, large objects, or burning materials.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release latch and empty after each use.
2. Clean filters: Rinse HEPA and pre-motor filters monthly; air dry completely.
3. Clear brush roll: Remove hair and debris from brush roll regularly.
4. Check for blockages: Inspect hose, wand, and nozzles for obstructions.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com