Shark SV1106 N Vacuum Cleaner Manual

The Shark SV1106 N is a versatile upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a powerful motor, advanced brushroll technology, a large-capacity dust cup, multiple cleaning modes, a washable filter system, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with motorized brushroll, Handle with controls, Dust cup with release, Hose and wand, Various cleaning attachments.

Feature	Description
Powerful Suction Motor	Provides deep cleaning on carpets and hard floors
Motorized Brushroll	Agitates and lifts embedded dirt from carpets
Large Capacity Dust Cup	Easy-to-empty, bagless design
Washable Filter System	Includes pre-motor and post-motor filters
Cleaning Mode Selector	Adjusts settings for carpets, hard floors, or delicate rugs
Hose and Wand	For above-floor cleaning and reaching under furniture
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning
Cord Wrap	Integrated cord storage hooks

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach Handle: Align handle with upright body and secure with provided screws.
Install Wand: Insert wand into hose connector until it clicks into place.
Attach Hose: Connect hose to the front of the vacuum body.
Install Filters: Ensure both pre-motor and post-motor filters are properly seated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first cleaning, perform a quick setup.

Check Filters: Ensure both filters are clean and properly installed.
Empty Dust Cup: Verify dust cup is empty and securely attached.
Select Cleaning Mode: Turn mode selector to appropriate setting (e.g., CARPET for carpets).
Test Power: Plug in, turn on power switch, and ensure brushroll is rotating.
Adjust Height: If adjustable, set cleaning head height for your floor type.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll while vacuum is on.

Specifications

Model: Shark SV1106 N Upright Vacuum.
Power Source: 120V AC, 60Hz.
Motor: High-efficiency, powerful suction motor.
Dust Cup Capacity: 1.5 liters (dry).
Filter System: Washable pre-motor and post-motor filters.
Cord Length: 25 feet.
Cleaning Modes: Carpet, Hard Floor, Delicate Rug.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 15 lbs.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Brushroll on/off button. Body: Mode selector, Dust cup release, Hose release.

Cleaning Modes: CARPET (brushroll on, full suction), HARD FLOOR (brushroll off or on with guard), DELICATE (reduced suction). Height Adjustment: Manual lever to raise/lower cleaning head (if equipped).

Accessories: Attach tools to wand or hose end for above-floor cleaning.

Using Attachments

For cleaning upholstery, stairs, ceilings, and tight spaces.

Turn off vacuum and unplug if changing attachments.
Remove wand from hose connector.
Attach desired tool (crevice, dusting brush, etc.) to hose end or wand.
Plug in, turn on, and clean targeted area.
Detach tool and reinstall wand for floor cleaning.

Tip: Use upholstery tool for sofas and curtains; crevice tool for corners and edges.

Cleaning Modes

Optimize cleaning based on floor type.

Carpet Mode: Brushroll on, full suction. Use for medium to high-pile carpets.
Hard Floor Mode: Brushroll off or on with guard. Protects hard surfaces from scratches.
Delicate Rug Mode: Reduced suction. For fragile or antique rugs.
Above-Floor Mode: Use hose and attachments for furniture, stairs, etc.

WARNING! Do not use carpet mode on hard floors without brushroll guard; may cause damage.

Maintenance

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button, remove cup, empty into trash.
Clean Filters: Remove and rinse pre-motor and post-motor filters monthly. Air dry completely before reinstalling.
Check Brushroll: Remove debris (hair, strings) from brushroll regularly.
Inspect Hose/Wand: Clear any blockages.
Check Belt: If equipped, inspect drive belt for wear every 6 months.

CAUTION! Always unplug vacuum before performing maintenance. Do not operate with wet filters.

Care & Storage

Store in a cool, dry place. Wrap cord around cord wraps. Empty dust cup after each use.

CAUTION! Do not store with wet filters. Keep away from heat sources and water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter/hose	Empty dust cup; check and clean filters; clear hose/wand blockage.
Brushroll not spinning	Debris wrapped around brushroll, belt issue	Unplug, remove debris; check and replace belt if worn.
Vacuum won't turn on	Power outlet, cord, switch	Check outlet; inspect cord for damage; ensure power switch is on.
Overheating	Clogged filters, full dust cup	Unplug, let cool; clean filters; empty dust cup.
Unusual noise	Foreign object in brushroll or hose	Unplug, inspect brushroll and hose; remove obstruction.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com