Shark SV1105Z 40 Vacuum Cleaner Manual

The Shark SV1105Z 40 is a powerful 40-volt cordless stick vacuum cleaner with a detachable handheld pod, LED headlights, a large-capacity dust cup, a multi-surface brush roll, and advanced filtration. It features multiple cleaning modes, a wall-mount charging dock, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Operating Modes 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Cordless stick vacuum body, Detachable handheld pod, Charging dock, Large dust cup, LED headlights, Multi-surface brush roll, Advanced HEPA filtration, Various cleaning attachments.

FeatureDescription
40V Lithium-Ion BatteryProvides extended run time and consistent power
Detachable Handheld PodConverts to a portable vacuum for above-floor cleaning
LED HeadlightsIlluminates dark areas under furniture
Multi-Surface Brush RollAutomatically adjusts between carpets and hard floors
Large Dust CupEasy-to-empty, hygienic design
Advanced FiltrationCaptures 99.9% of dust and allergens
Wall-Mount Charging DockFor convenient storage and charging
POWER ButtonTurns vacuum on/off
Mode SelectorSwitches between Eco, Normal, and Max modes
Battery IndicatorLED display shows remaining battery life

Assembly & Installation

Unpack and inspect all contents. Assemble the vacuum before first use.

  1. Attach the handle: Insert the handle into the main body until it clicks into place.
  2. Install the floor nozzle: Align the nozzle with the body and push until it locks.
  3. Mount the charging dock: Use included screws to mount the dock on a wall near an outlet.
  4. Charge the vacuum: Place the vacuum on the dock and plug the charger into a 120V outlet.

WARNING! Ensure the vacuum is turned off and the battery is not hot before charging. Keep the charging area dry and well-ventilated.

First-Time Setup

Fully charge the vacuum before initial use.

  1. Initial charge: Leave the vacuum on the dock for at least 4.5 hours for a full charge.
  2. Check battery indicator: The LED should show full charge (all lights on).
  3. Attach desired accessory: For above-floor cleaning, attach the crevice tool or dusting brush.
  4. Select cleaning mode: Use the mode button to choose Eco for longer runtime or Max for deep cleaning.

CAUTION! Do not use the vacuum without the dust cup and filter properly installed.

Specifications

Controls and Settings

Main controls located on the handle. Power Button: Press to turn on/off. Mode Button: Cycle through Eco (green), Normal (blue), Max (red). Battery Indicator: 4 LEDs show charge level (25% per LED). Release Buttons: Press to detach handheld pod or remove floor nozzle.

Handheld Pod: Detach by pressing the release button; use with attachments for furniture, stairs, or cars.

Settings: No user-adjustable settings beyond mode selection. The brush roll automatically adjusts suction based on floor type.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

  1. Crevice Tool: For tight spaces like between cushions or along edges.
  2. Dusting Brush: For delicate surfaces like blinds, lampshades, and keyboards.
  3. Upholstery Tool: For sofas, chairs, and car interiors.
  4. Motorized Brush (optional): For pet hair on carpets (sold separately).

Tip: Ensure the vacuum is off before attaching or detaching accessories.

Operating Modes

Three cleaning modes optimize performance and battery life.

  1. Eco Mode (Green): For light cleaning and maximum run time (up to 40 min).
  2. Normal Mode (Blue): Balanced cleaning for everyday use (up to 25 min).
  3. Max Mode (Red): Maximum suction for deep cleaning or high-pile carpets (up to 15 min).
  4. Handheld Mode: Detach the pod for above-floor cleaning; uses same mode settings.
  5. Brush Roll Control: Automatically adjusts speed based on floor type; manual override not needed.

WARNING! Do not use on wet surfaces or to pick up liquids, flammable materials, or sharp objects.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button, remove cup, empty into trash. Rinse with water if needed; dry completely before reinserting.

Clean Filter: Remove filter every month; tap to remove dust or rinse under cold water. Allow to dry for 24 hours before reuse.

Check Brush Roll: Remove debris (hair, strings) from brush roll monthly. Press release tabs to remove brush roll for thorough cleaning.

Battery Care: Store in a cool, dry place. For long storage, charge to 50% and recharge every 3 months.

CAUTION! Unplug charger and ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. SHARK is a registered trademark of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not seatedCharge fully; ensure battery is properly clicked into place.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; clean filter; check hose for blockages.
Brush roll not spinningDebris tangled/obstructionTurn off, remove nozzle, clear hair or strings from brush roll.
Battery not chargingFaulty connection/dock issueEnsure vacuum is properly seated on dock; check outlet; try different outlet.
Overheating (flashing red light)Continuous use/clogTurn off, let cool for 45 minutes; check for clogs; clean filter.

Reset: Turn off, remove battery for 10 seconds, reinsert, and charge fully.

Service: 1-800-798-7398; sharkclean.com

Shark SV1105Z 40 Vacuum Cleaner Manual © - All Rights Reserved 2025