Shark SV1100 Vacuum Cleaner Manual

The Shark SV1100 is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering for easy maneuverability, multiple cleaning modes (carpet, hard floor, above-floor), and a variety of attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, DuoClean floor head, Dust cup with filter system, Hose, Wand, and various cleaning attachments.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the handle: Align handle with main body and push until it clicks into place.
2. Connect the wand: Insert wand into the hose connector until secure.
3. Attach floor head: Align floor head with the vacuum body and push until it locks.
4. Install filters: Place foam and felt filters into the dust cup as indicated.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use to prevent injury or damage.

First-Time Use

Before first use, ensure assembly is complete and filters are installed.

1. Power on: Press the POWER button on the handle.
2. Select mode: Use the Mode Selector to choose Carpet or Hard Floor based on surface.
3. Begin cleaning: Push vacuum forward and back in overlapping strokes.
4. Empty dust cup: Press release button to remove and empty when full.
5. Store properly: Wrap cord around cord hooks and store in a dry place.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush rolls.

Specifications

• Model: Shark SV1100 Upright Vacuum.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Filtration: Foam and felt filter system; HEPA filter optional.
• Attachments Included: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle. Floor head features brush roll shutoff for hard floors.

Handle Controls: POWER button, Mode Selector (Carpet/Hard Floor), Wand Release button.

Floor Head: Brush Roll On/Off switch (for hard floors and area rugs). LED lights automatically turn on when vacuum is powered.

Settings: Carpet mode (agitator brush engaged), Hard Floor mode (brush roll off for gentle cleaning), Above-Floor mode (using wand and attachments).

Using Attachments

For above-floor cleaning: detach wand and connect desired attachment.

1. Turn off vacuum and detach wand by pressing Wand Release button.
2. Select attachment: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture.
3. Connect attachment to end of wand or hose.
4. Turn vacuum back on and begin cleaning.

Tip: Use the pet multi-tool for removing pet hair from furniture and stairs.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet Mode: Use for medium to high-pile carpets. Brush roll agitates fibers to remove embedded dirt.
2. Hard Floor Mode: Use for wood, tile, laminate. Brush roll shuts off to prevent scattering debris.
3. Above-Floor Mode: Use with wand and attachments for curtains, ceilings, furniture, and stairs.
4. Spot Cleaning: Use hose with attachments for small, targeted areas.

WARNING! Always turn off vacuum before changing modes or attachments.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: Empty after each use or when full indicator appears.
2. Clean Filters: Rinse foam and felt filters monthly with cold water; air dry completely for 24 hours before reinstalling.
3. Check Brush Roll: Regularly remove hair and debris wrapped around brush roll.
4. Inspect Hose & Wand: Clear any blockages to maintain suction.
5. Store Properly: Keep in a cool, dry place away from direct sunlight.

CAUTION! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Safety Information

Read all instructions before use to reduce risk of fire, electric shock, or injury.

• Use only as described in this manual.
• Do not use outdoors or on wet surfaces.
• Do not allow children to operate vacuum.
• Keep hair, loose clothing, fingers, and feet away from openings and moving parts.
• Do not pick up flammable or combustible materials.
• Do not use with damaged cord or plug.
• Disconnect plug before servicing.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. SHARK and DUOCLEAN are registered trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 60 minutes to reset thermal protector if overheated.

Service: 1-800-798-7398; sharkclean.com