Shark SV1100 40 Vacuum Cleaner Manual

The Shark SV1100 40 is a powerful 40-volt cordless stick vacuum cleaner designed for whole-home cleaning. It features a lightweight, swivel-steer design, a removable battery, multiple cleaning modes, a motorized brushroll for carpets and hard floors, a large dust cup, washable filters, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Parts Identification 3. Charging the Battery 4. Specifications 5. Controls and Settings 6. Using the Vacuum 7. Cleaning Modes & Attachments 8. Emptying & Cleaning the Dust Cup 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Removable 40V Lithium-ion Battery, Charger, Motorized Floor Nozzle, Crevice Tool, Upholstery Tool, Dusting Brush, Wall Mount (optional).

Feature	Description
Power Source	40V Lithium-ion rechargeable battery
Cleaning Modes	Eco, Normal, Max (for increased suction)
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Swivel Steering	Maneuvers easily around furniture and obstacles
Dust Cup Capacity	0.7 liters, easy-empty design
Filtration	Washable pre-motor and post-motor filters
Attachments	Crevice tool, upholstery tool, dusting brush included
Battery Indicator	LED lights show remaining charge
Standby Mode	Automatically powers down after inactivity
Wand Release	Button to detach wand for above-floor cleaning

Assembly & Parts Identification

Unpack all parts from the box. Ensure you have all components listed in the manual.

Insert the wand into the main vacuum body until it clicks securely.
Attach the motorized floor nozzle to the end of the wand until it clicks.
To install the battery, align it with the slot on the vacuum body and slide it in until it locks.
Store attachments on the provided wall mount or in a convenient location.

WARNING! Ensure the vacuum is turned off and the battery is removed before assembly. Do not force parts together.

First-Time Setup & Charging

Before first use, fully charge the battery.

Plug the charger into a standard 120V wall outlet.
Connect the charger to the battery port on the vacuum or to the battery directly if removed.
The battery indicator LEDs will illuminate sequentially during charging. A full charge takes approximately 4 hours.
Once fully charged, all LED lights will remain solid. Unplug the charger.

CAUTION! Use only the Shark charger provided. Charge in a dry location away from heat sources.

Specifications

Model: Shark SV1100 40.
Power: 40V Lithium-ion battery.
Run Time: Up to 40 minutes in Eco mode, 25 minutes in Normal, 15 minutes in Max.
Dust Cup: 0.7L capacity.
Filtration:Washable foam and felt filters.
Weight: 6.8 lbs (with battery and floor nozzle).

Noise Level: < 75 dB.

Charging Time: Approx. 4 hours to full.

Included Tools: Motorized floor nozzle, crevice tool, upholstery tool, dusting brush.

Controls and Settings

Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco, Normal, and Max suction modes. Battery Indicator: Shows remaining charge with 4 LED lights. Wand Release Button: Press to detach wand for handheld use.

Cleaning Modes: ECO (extended run time for light cleaning), NORMAL (balanced cleaning for daily use), MAX (maximum suction for deep cleaning or high-pile carpets).

To switch modes, press the MODE button while the vacuum is running. The corresponding LED will illuminate.

Using the Vacuum

For floor cleaning: Ensure the motorized floor nozzle is attached. For above-floor cleaning: Press the wand release button and use with desired attachment.

Press the POWER button to start. Select your desired mode.

Push the vacuum forward and back in smooth, overlapping strokes.

Use the swivel steering to navigate around furniture and into corners.

To clean above floors, detach the wand and attach the crevice, upholstery, or dusting tool.

Press POWER to turn off. The vacuum will enter standby mode after 5 minutes of inactivity.

Tip: For best results on carpets, use two slow passes. Empty the dust cup when it reaches the MAX fill line.

Cleaning Modes & Attachments

Each attachment is designed for specific cleaning tasks.

Motorized Floor Nozzle: For carpets and hard floors. Brushroll automatically adjusts height.

Crevice Tool: For tight spaces like between cushions, along baseboards, and in car interiors.

Upholstery Tool: For cleaning sofas, chairs, mattresses, and stairs.

Dusting Brush: For delicate surfaces like blinds, lampshades, keyboards, and shelves.

To attach: Align the tool with the end of the wand or handheld vacuum and push until it clicks. To detach, press the release button on the tool's collar.

Emptying & Cleaning the Dust Cup

Empty the dust cup after each use or when it reaches the MAX line.

Turn off and unplug the vacuum (if charging).

Place the dust cup over a trash can.

Press the dust cup release button and lift the cup away from the vacuum body.

Press the bottom latch to open the door, allowing debris to fall out. Tap gently if needed.

Close the door and reattach the dust cup until it clicks.

WARNING! Do not use the vacuum with a full dust cup, as it reduces suction and can damage the motor.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Filters: Wash the pre-motor and post-motor filters with cold water every 3 months. Allow to air dry completely for 24 hours before reinstalling.

Brushroll: Regularly remove hair and fibers wrapped around the brushroll. Use scissors to cut and remove debris.

Exterior: Wipe with a dry or slightly damp cloth. Do not immerse in water.

Battery: Store in a cool, dry place. For long-term storage, charge to 50% and store separately.

CAUTION! Never use the vacuum without filters installed. Do not use wet filters.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark is a registered trademark. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Battery not charged/inserted Charge battery fully; ensure it's clicked into place.

Reduced suction power Full dust cup, clog, dirty filters Empty dust cup; check hose and nozzle for blockages; wash and dry filters.

Brushroll not spinning Debris entanglement, obstruction Turn off, unplug, and remove debris from brushroll ends and chamber.

Battery drains quickly Old battery, Max mode use Use Eco or Normal mode for general cleaning; consider battery replacement if old.

Vacuum turns off unexpectedly Overheating, full dust cup Allow to cool for 45 minutes; empty dust cup; check for clogs.

Reset: If unresponsive, remove the battery for 60 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com

Shark SV1100 40 Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged/inserted	Charge battery fully; ensure it's clicked into place.
Reduced suction power	Full dust cup, clog, dirty filters	Empty dust cup; check hose and nozzle for blockages; wash and dry filters.
Brushroll not spinning	Debris entanglement, obstruction	Turn off, unplug, and remove debris from brushroll ends and chamber.
Battery drains quickly	Old battery, Max mode use	Use Eco or Normal mode for general cleaning; consider battery replacement if old.
Vacuum turns off unexpectedly	Overheating, full dust cup	Allow to cool for 45 minutes; empty dust cup; check for clogs.