Shark STEAMPICKUP SD200EU 26 Vacuum Cleaner Manual

The Shark STEAMPICKUP SD200EU 26 is a powerful 2-in-1 vacuum cleaner featuring steam cleaning technology, a 26 cm cleaning path, HEPA filtration system, adjustable steam settings, large-capacity dust container, washable filters, multiple floor tool attachments, cord storage, and a lightweight, maneuverable design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Steam Cleaning Operation 8. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with steam generator, Power cord, Floor nozzle with steam jets, Crevice tool, Upholstery brush, Dusting brush, Washable HEPA filter, Large-capacity dust container.

FeatureDescription
Steam Cleaning TechnologyGenerates steam for deep cleaning and sanitizing floors
26 cm Cleaning PathWide cleaning path for efficient coverage
HEPA Filtration SystemCaptures 99.9% of dust and allergens
Adjustable Steam SettingsLow/High steam control for different surfaces
Large Dust ContainerEasy-to-empty 1.2L capacity
Washable FiltersReusable main filter and pre-motor filter
Multiple AttachmentsTools for floors, upholstery, crevices, and dusting
Cord StorageBuilt-in cord wrap for easy storage
Lightweight DesignEasy to carry and maneuver
Powerful Suction800W motor for effective cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach floor nozzle: Align nozzle with vacuum body until it clicks into place.
  2. Install filters: Place washable HEPA filter and pre-motor filter in their compartments.
  3. Attach hose: Connect hose to vacuum body and nozzle.
  4. Attach desired tool: Click tool onto end of hose or nozzle.
  5. Unwrap power cord: Fully extend cord from storage compartment.

WARNING! Ensure vacuum is unplugged during assembly. Do not force connections.

First-Time Use

Prepare vacuum for initial cleaning session.

  1. Fill water tank: Use clean tap water; do not exceed MAX line.
  2. Plug into power outlet: Use appropriate voltage (220-240V).
  3. Select mode: Turn dial to VACUUM ONLY or STEAM & VACUUM.
  4. Power on: Press power button; indicator light will illuminate.
  5. Wait for steam: Allow 30 seconds for steam to generate when in steam mode.
  6. Begin cleaning: Push vacuum forward on floor surface.

CAUTION! Do not use on unsealed wood, waxed floors, or sensitive surfaces. Test in inconspicuous area first.

Specifications

Controls and Settings

Main controls located on vacuum body.

Power Button: Turns vacuum on/off. Mode Dial: Selects VACUUM ONLY or STEAM & VACUUM. Steam Control Button: Adjusts steam output (Low/High). Cord Release: Button to release cord from storage. Dust Container Release: Button to remove container for emptying.

Steam Settings: LOW for delicate surfaces, HIGH for tough stains and sanitizing. Suction Power: Fixed powerful suction in all modes. Indicator Lights: Power ON (green), Steam READY (blue), Water LOW (red).

Attachments & Accessories

Use appropriate attachment for each cleaning task.

  1. Floor Nozzle: For carpets and hard floors with steam cleaning.
  2. Crevice Tool: For tight spaces, corners, and along edges.
  3. Upholstery Brush: For sofas, chairs, and fabric surfaces.
  4. Dusting Brush: For shelves, blinds, and delicate surfaces.

Tip: Ensure attachments are securely clicked into place before use.

Steam Cleaning Operation

For deep cleaning and sanitizing hard floors.

  1. Prepare area: Vacuum dry debris first if heavily soiled.
  2. Fill water tank: Use clean tap water only; no additives.
  3. Select STEAM & VACUUM mode: Turn dial to steam setting.
  4. Power on: Press power button; wait for steam ready light.
  5. Adjust steam: Press steam button for LOW or HIGH setting.
  6. Clean: Push slowly forward; steam activates automatically.
  7. Overlap strokes: Slightly overlap each pass for even cleaning.
  8. After use: Turn off, unplug, and empty water tank.

WARNING! Steam is hot. Do not direct steam at people, pets, or electrical outlets. Allow floor to dry completely before walking.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

After Each Use: Empty dust container. Rinse water tank and let dry. Weekly: Check and clean floor nozzle for debris. Monthly: Wash HEPA filter and pre-motor filter with cold water; air dry completely for 24 hours before reinstalling. As Needed: Wipe exterior with damp cloth; ensure vacuum is unplugged.

CAUTION! Never immerse vacuum in water. Ensure all parts are completely dry before reassembly and use.

Regulatory Information

CE marked. Complies with European directives for safety and electromagnetic compatibility. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.eu or contact customer service at local toll-free number provided in regional packaging.

Troubleshooting

SymptomPossible CauseCorrective Action
No power / won't turn onNot plugged in / outlet issueCheck power cord connection; try different outlet; check circuit breaker.
Reduced suctionFull dust container / clogged filterEmpty dust container; check and clean filters; clear hose or nozzle blockage.
No steam producedEmpty water tank / not in steam modeFill water tank to MAX line; ensure mode dial is set to STEAM & VACUUM.
Water leakingOverfilled tank / loose connectionDo not exceed MAX line; ensure tank is securely seated and locked.
Unusual noiseDebris in brush roll / obstructionTurn off and unplug; check floor nozzle for tangled hair or debris; clear obstruction.
Steam ready light not illuminatingHeating element issue / thermostatAllow more time to heat (up to 60 sec); if persistent, contact customer service.

Reset: Unplug for 2 minutes to reset thermal protector if overheated.

Service: For repairs, contact authorized Shark service center. Do not attempt to disassemble unit.

Shark STEAMPICKUP SD200EU 26 Vacuum Cleaner Manual © - All Rights Reserved 2025