Shark Steam Pocket Mop SE450 Vacuum Cleaner Manual

The Shark Steam Pocket Mop SE450 is a versatile steam cleaning system designed for hard floor surfaces. It combines the power of steam with a vacuum function for deep cleaning and sanitization. Features include a steam-ready mop head, refillable water tank, multiple steam settings, washable microfiber pads, and attachments for various cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using the Steam Mop 7. Using the Vacuum Function 8. Attachments & Accessories 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Steam mop handle with controls, Refillable water tank, Steam-ready mop head, Washable microfiber pads, Vacuum hose and nozzle, Crevice tool, Dusting brush, Power cord.

FeatureDescription
Steam Control DialAdjusts steam output (Low/Medium/High)
Water TankRemovable tank for easy filling and cleaning
Steam TriggerManual control for steam release
Mop HeadSwivel head for maneuverability; accepts microfiber pads
Vacuum PortConnection point for vacuum hose and attachments
Power SwitchTurns unit on/off
Ready Indicator LightLED shows when steam is ready
Cord WrapIntegrated storage for power cord
Microfiber PadsMachine-washable pads for trapping dirt
Attachment StorageOn-board clips for tools

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

  1. Attach handle: Insert handle into body until it clicks securely.
  2. Install water tank: Fill with distilled water, then slide into compartment.
  3. Attach mop head: Align and press until locked.
  4. Attach microfiber pad: Stretch pad over mop head, ensuring full coverage.
  5. Connect vacuum hose: Insert into vacuum port and twist to lock.

WARNING! Use only distilled water to prevent mineral buildup. Do not use chemical cleaners in tank.

First-Time Use

Prepare unit before initial steam cleaning.

  1. Fill tank: Use distilled water only; do not overfill.
  2. Plug in: Connect to standard 120V outlet.
  3. Power on: Turn switch to ON; wait for ready light (approx. 30 seconds).
  4. Test steam: Press steam trigger to ensure steam flow.
  5. Begin cleaning: Move mop in forward motions; avoid leaving in one spot.

CAUTION! Steam is hot. Keep away from children and pets. Do not use on unsealed wood or sensitive surfaces.

Specifications

Controls and Settings

Located on handle: Power Switch, Steam Control Dial, Steam Trigger, Ready Light.

Steam Control Dial: Adjust steam output. Low for delicate surfaces, Medium for regular cleaning, High for tough grime.

Steam Trigger: Press for steam; release to stop. Use intermittent bursts for control.

Ready Light: Solid green indicates steam is ready; flashing means heating.

Vacuum Switch: On/off for vacuum function (if equipped with separate control).

Using the Steam Mop

For cleaning sealed hard floors: tile, laminate, vinyl, sealed hardwood.

  1. Ensure floor is free of loose debris.
  2. Attach clean microfiber pad.
  3. Select steam setting based on floor type.
  4. Press trigger and move mop slowly in straight lines.
  5. Overlap strokes for complete coverage.
  6. Change pad when soiled.
  7. After use, release trigger and turn off power.
  8. Empty any remaining water from tank.

Tip: For stubborn stains, pre-treat with water or use High steam setting.

Using the Vacuum Function

For dry pickup of debris before or after steaming.

  1. Attach desired nozzle: floor nozzle, crevice tool, or brush.
  2. Turn vacuum switch to ON.
  3. Glide nozzle over surface; use back-and-forth motion.
  4. For corners/edges, use crevice tool.
  5. Turn off vacuum after use.
  6. Empty dust cup regularly.

Note: Do not vacuum wet debris or liquids.

Attachments & Accessories

Included tools enhance cleaning versatility.

AttachmentUse
Floor NozzleGeneral vacuuming on hard floors and low-pile carpets
Crevice ToolReach tight spaces, corners, between appliances
Dusting BrushGentle cleaning of blinds, shelves, electronics
Upholstery NozzleFabric surfaces, stairs, car interiors
Extra Microfiber PadsReplace soiled pads during cleaning

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. After each use: Empty water tank, remove pad, and let unit cool.
  2. Clean microfiber pads: Machine wash warm, air dry; do not use fabric softener.
  3. Descale tank: Monthly, use vinegar solution (50/50 water/vinegar), run steam briefly, then rinse.
  4. Clean vacuum filter: Rinse under water, air dry completely before reinserting.
  5. Inspect nozzles: Clear any blockages with a pin or brush.
  6. Store: Wrap cord, store attachments, keep in dry place.

CAUTION! Unplug and cool completely before maintenance. Do not immerse unit in water.

Regulatory Information

FCC Part 15: Class B device; complies with limits for residential use. UL listed for safety. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is protected by patents: US D789,028, etc. Use only authorized accessories.

Troubleshooting

SymptomPossible CauseCorrective Action
No steamEmpty tank, low setting, clogFill with distilled water; select higher setting; descale tank.
Steam weakMineral buildup, incorrect settingDescale; use High setting; ensure trigger fully pressed.
Leaking waterOverfilled tank, loose connectionDo not fill past MAX line; check tank seal.
Vacuum not picking upFull dust cup, clogged hoseEmpty dust cup; check hose for blockages.
Unit won't turn onNo power, tripped breakerCheck outlet; reset breaker; ensure cord plugged in.
Bad odorMineral deposits, moldDescale thoroughly; clean tank with vinegar solution.

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com

Shark Steam Pocket Mop SE450 Vacuum Cleaner Manual © - All Rights Reserved 2025