Shark Steam Blaster EP905 Vacuum Cleaner Manual

The Shark Steam Blaster EP905 is a powerful steam vacuum cleaner designed for deep cleaning carpets, upholstery, and hard floors. It combines steam cleaning technology with powerful suction to remove dirt, stains, and allergens. Features include a built-in steam generator, multiple cleaning attachments, large-capacity tanks, and adjustable steam settings. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Attachments 7. Operating Instructions 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Steam generator unit, main cleaning head, hose assembly, water tank, solution tank, accessory storage, power cord, and remote control.

Feature	Description
Steam Generator	Heats water to produce steam for deep cleaning
Water Tank	Large capacity tank for clean water
Solution Tank	Holds cleaning solution for added cleaning power
Cleaning Head	Motorized brush roll for carpets and floors
Hose Assembly	Flexible hose with wand for extended reach
Accessory Storage	Built-in compartment for attachments
Power Cord	Long retractable cord for easy movement
Steam Control	Adjustable steam settings for different surfaces
Suction Control	Variable suction power settings
LED Display	Shows settings and operational status

Installation & Setup

Unpack and inspect all components. Assemble according to instructions.

Attach cleaning head: Connect to main unit until it clicks into place.
Install hose: Connect hose to unit and wand securely.
Fill tanks: Add clean water to water tank; add solution to solution tank if desired.
Plug into power outlet: Ensure outlet is properly grounded.

WARNING! Unit is heavy; lift with care. Ensure all connections are secure before use.

First-Time Use

Prepare unit for initial cleaning session.

Prime the system: Fill tanks and allow unit to heat for 5 minutes.
Test settings: Use low steam setting on inconspicuous area first.
Adjust suction: Set to appropriate level for surface being cleaned.
Begin cleaning: Move slowly over surface for optimal results.

CAUTION! Steam is hot; avoid contact with skin. Keep children and pets away during operation.

Specifications

Model: EP905 Steam Blaster
Power: 120V AC, 60Hz, 12 Amps
Water Tank Capacity: 1.5 gallons
Solution Tank Capacity: 0.5 gallons
Steam Temperature: Up to 240°F
Cord Length: 25 feet retractable
Hose Length: 8 feet
Weight: 18 lbs (empty)
Dimensions: 15" x 12" x 45"
Warranty: 1-year limited warranty

Controls and Settings

Main control panel located on top of unit. Remote control for additional functions.

Main Controls: POWER, STEAM LEVEL (Low/Medium/High), SUCTION (Low/High), HEAT READY indicator, TANK EMPTY indicator.

Steam Settings: Adjust based on surface type (Low for delicate fabrics, High for tough stains). Suction Control: High for deep pile carpets, Low for hard floors. Display: LED shows current settings, temperature, and error codes. Remote: Additional control for steam activation and accessory functions.

Cleaning Attachments

Multiple attachments included for various cleaning tasks.

Upholstery Tool: For sofas, chairs, and car interiors.
Crevice Tool: For tight spaces and corners.
Dusting Brush: For delicate surfaces and blinds.
Floor Nozzle: For hard floors and low-pile carpets.
Extension Wand: For high reach cleaning.

Tip: Store attachments in built-in compartment when not in use.

Operating Instructions

Follow these steps for effective cleaning.

Prepare area: Remove loose debris before steam cleaning.
Fill tanks: Use clean, warm water for best results.
Select settings: Choose appropriate steam and suction levels.
Begin cleaning: Move in straight, overlapping passes.
Empty tanks: Drain after each use to prevent mildew.
Clean unit: Wipe down after each use.

WARNING! Never use bleach or ammonia in solution tank. Use only approved cleaning solutions.

Maintenance & Care

Regular maintenance ensures optimal performance.

Daily: Empty and rinse tanks after each use. Weekly: Clean filters and check hoses for blockages. Monthly: Descale steam generator if using hard water. Storage: Store in cool, dry place with tanks empty.

CAUTION! Unplug unit before performing any maintenance. Allow to cool completely before cleaning.

Safety Information

Important safety precautions for operation.

Read manual completely before use.
Keep away from children and pets.
Do not immerse in water.
Use only approved accessories.
Check cord for damage before use.
Do not use on unsealed wood floors.

WARNING! Risk of burns from hot steam and surfaces. Use protective gloves when handling hot components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed: Meets safety standards for household appliances. Copyright © 2025 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No steam production	Empty water tank/Clogged nozzle	Fill water tank; clean steam nozzle with pin tool provided.
Weak suction	Full dirt tank/Clogged filter	Empty dirt tank; clean or replace filter.
Unit won't turn on	Power cord/Overheat protection	Check power connection; allow unit to cool for 30 minutes.
Leaking water	Loose connections/Cracked tank	Check all connections; inspect tanks for damage.
Poor cleaning results	Wrong settings/Dirty solution	Adjust steam/suction settings; use fresh cleaning solution.

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-798-7398; www.sharkclean.com