Shark StainStriker HairPro Pet Vacuum Cleaner Manual

The Shark StainStriker HairPro Pet Vacuum Cleaner is a powerful, multi-surface cleaning system designed specifically for homes with pets. It features advanced hair removal technology, a motorized brush roll, a large-capacity dust cup, HEPA filtration, multiple cleaning modes, specialized pet tools, and a lightweight, maneuverable design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, motorized floor nozzle, extendable wand, pet hair tool, crevice tool, dusting brush, large-capacity dust cup with HEPA filter, and power cord.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the wand: Insert the lower end of the wand into the socket on the vacuum body until it clicks.
2. Attach the floor nozzle: Connect the top of the floor nozzle to the wand until it clicks securely.
3. Install the dust cup: Ensure the dust cup is properly seated and locked into the vacuum body.
4. Attach the hose: For above-floor cleaning, connect the hose to the front of the vacuum pod.
5. Plug into a standard 120V AC power outlet.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Before first use, ensure all filters are installed and the dust cup is empty.

1. Select cleaning surface: Use the mode selector on the floor nozzle to choose between Hard Floor or Carpet.
2. Turn on: Press the power switch located on the main body.
3. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
4. Use attachments: Detach the wand and connect the Pet Multi-Tool for furniture, stairs, or tight spaces.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

• Model: Shark StainStriker HairPro Pet.
• Power Source: Corded Electric, 120V, 60Hz.
• Suction Power: Advanced cyclonic suction with sealed system.
• Dust Cup Capacity: 1.2 Quarts.
• Filtration: HEPA filter, foam filter, and felt filter.
• Cord Length: 25 feet.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.
• Included Tools: Pet Multi-Tool, Crevice Tool, Dusting Brush, Upholstery Tool.

Controls and Settings

Main Body: POWER switch, RELEASE button for dust cup, hose connector. Floor Nozzle: MODE selector (Hard Floor/Carpet), brush roll ON/OFF switch, LED lights.

Operation: Power on, select surface mode, clean. Use RELEASE button to detach pod for portable cleaning. Use brush roll switch to turn brush roll on for carpets or off for delicate rugs.

Settings: No adjustable suction settings; suction is automatically optimized based on selected floor mode and detected surface.

Cleaning Modes & Attachments

Hard Floor Mode: Reduces brush roll speed to prevent scattering debris. Carpet Mode: Increases brush roll speed and suction for deep cleaning.

1. For floors: Use the assembled vacuum with the floor nozzle.
2. For above-floor: Detach the pod, attach the hose and desired tool (Pet Multi-Tool, crevice tool, etc.).
3. For stairs: Use the Pet Multi-Tool directly on the hose for powerful pet hair removal.
4. For upholstery: Use the upholstery tool attachment.

Tip: Regularly check the brush roll for obstructions, especially when cleaning areas with long hair or threads.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup after each use or when the full indicator appears.
2. Clean filters monthly or as needed (see Filter Cleaning section).
3. Inspect and clear the brush roll of hair and debris weekly.
4. Check hose and attachments for clogs periodically.
5. Wipe down the exterior with a dry cloth.

WARNING! Always unplug the vacuum from the electrical outlet before performing any maintenance.

Emptying the Dust Cup

To maintain suction, empty the dust cup frequently.

1. Turn off and unplug the vacuum.
2. Press the DUST CUP RELEASE button on the main body.
3. Hold the dust cup over a trash can and press the bottom release latch to open the door.
4. Gently tap to remove debris. Close the door securely.
5. Reinsert the dust cup into the vacuum until it clicks.

CAUTION! Do not use water to clean the dust cup. Empty it outdoors if cleaning fine dust or allergens.

Filter Cleaning

The vacuum uses a multi-stage filtration system: HEPA filter, foam filter, and felt filter.

1. Unplug the vacuum. Remove the dust cup.
2. Locate the filter compartment behind the dust cup area.
3. Remove the HEPA filter and the pre-motor foam & felt filters.
4. Tap filters gently to remove loose dust. Rinse the foam and felt filters under lukewarm water. Do not wash the HEPA filter.
5. Allow all filters to air dry completely for at least 24 hours before reinstalling.
6. Reinstall filters in the correct order and replace the dust cup.

WARNING! Never operate the vacuum without all filters installed and completely dry.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B for Class B digital devices. It meets applicable Canadian ICES standards. Copyright © SharkNinja Operating LLC. Shark, StainStriker, and HairPro are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: If the motor overheats, it may shut off. Unplug, clear any blockages, clean filters, and allow to cool for 60 minutes before restarting.

Service: 1-800-798-7398; sharkclean.com