Shark StainStriker HairPro Pet PX250EUT Vacuum Cleaner Manual

The Shark StainStriker HairPro Pet PX250EUT is a powerful 2-in-1 upright and canister vacuum designed for pet owners and homes with high-traffic areas. It features the Anti-Hair Wrap technology to prevent hair tangles on the brushroll, a StainStriker motorized brush for deep carpet cleaning, a HEPA filter, multiple attachments for above-floor cleaning, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Filter System 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, motorized floor nozzle, extendable wand, canister conversion kit, pet multi-tool, crevice tool, dusting brush, upholstery tool, and HEPA filter.

Feature	Description
Anti-Hair Wrap Technology	Prevents hair and pet fur from tangling on the brushroll
StainStriker Motorized Brush	Deep cleans carpets and tackles set-in stains
HEPA Filtration System	Captures 99.9% of dust and allergens
2-in-1 Upright & Canister	Converts easily for above-floor cleaning
Large Capacity Dust Cup	0.9 gallon capacity for fewer empties
Pet Multi-Tool	Combines bristle brush and upholstery tool for pet hair
LED Headlights	Illuminates dark areas under furniture
Adjustable Suction Power	Multiple settings for different surfaces
Quick-Release Wand	Easy attachment and removal
Washable Filters	Easy to clean and maintain

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the upright body until it clicks into place.
Install the floor nozzle: Connect the hose to the back of the nozzle and slide it onto the vacuum body.
Attach the wand: Insert the wand into the hose connector on the vacuum body.
Connect the power cord: Ensure the cord is fully unwound and plugged into a 120V outlet.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

Power on: Press the power button on the handle.
Select surface setting: Use the dial on the floor nozzle for hard floors or carpets.
Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press the release button to remove and empty the dust cup after use.

CAUTION! Keep hair, loose clothing, and fingers away from moving parts and openings.

Specifications

Model: PX250EUT
Type: 2-in-1 Upright & Canister Vacuum
Motor Power: 10.0 Amps
Dust Cup Capacity: 0.9 gallons
Cord Length: 25 feet
Filtration: HEPA filter, foam filter, felt filter
Attachments: Pet Multi-Tool, Crevice Tool, Dusting Brush, Upholstery Tool
Weight: 14.5 lbs
Power Source: 120V AC, 60Hz
Warranty: 5-year limited warranty

Controls and Settings

Main controls located on the handle and floor nozzle.

Handle: Power button, suction control slider, wand release button.

Floor Nozzle: Surface dial (Hard Floor / Carpet), brushroll on/off switch, LED lights.

Suction Power: Adjust via slider on handle (Low/Medium/High). Surface Setting: Rotate dial on nozzle for optimal cleaning. Brushroll Control: Turn off for hard floors to prevent scattering debris. Canister Mode: Detach wand and attach desired tool for above-floor cleaning.

Using Attachments

For above-floor cleaning, convert to canister mode.

Turn off vacuum and unplug from outlet.
Press the wand release button and remove the wand from the upright body.
Attach desired tool to the end of the wand or hose.
Plug in and power on to use.

Tip: Use the Pet Multi-Tool on furniture, stairs, and car interiors. Use the crevice tool for tight spaces.

Cleaning Modes

Upright Mode: For large carpeted areas and hard floors. Canister Mode: For stairs, upholstery, ceilings, and above-floor surfaces.

Upright Carpet Cleaning: Set nozzle to "Carpet", brushroll ON, use high suction.
Upright Hard Floor: Set nozzle to "Hard Floor", brushroll OFF, use medium suction.
Canister Detail Cleaning: Attach appropriate tool, adjust suction as needed.
StainStriker Mode: For tough stains, make several slow passes over the area.

WARNING! Do not use on wet surfaces. Do not vacuum up liquids, large objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Check and clean brushroll monthly for obstructions.
Wash foam and felt filters every 3 months.
Replace HEPA filter every 12-18 months.
Inspect hose and wand for clogs periodically.

CAUTION! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Filter System

Three-stage filtration: pre-motor foam filter, post-motor felt filter, and HEPA filter.

Foam Filter: Wash with cold water every 3 months. Air dry completely before reinstalling.
Felt Filter: Tap to remove dust. Wash if heavily soiled. Air dry completely.
HEPA Filter: Replace every 12-18 months or as needed. Do not wash.

Note: Always ensure filters are completely dry before reinserting to prevent motor damage.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. This device may not cause harmful interference and must accept any interference received. Copyright © SharkNinja Operating LLC. Shark, StainStriker, HairPro, and Anti-Hair Wrap are trademarks of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; remove hose/wand blockages.
Brushroll not spinning	Hair wrap, obstruction, belt issue	Clean brushroll of hair and debris; check for obstructions; inspect belt.
Vacuum shuts off	Overheating, clogged filter	Turn off and unplug; let cool for 60 minutes; clean filters and check for clogs.
LED lights not working	Connection issue	Ensure floor nozzle is properly attached; check power connection.
Unusual noise	Foreign object in brushroll or hose	Turn off and unplug; inspect brushroll, hose, and wand for objects.

Reset: Unplug for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com