Shark SP1000 Vacuum Cleaner Manual

The Shark SP1000 is a powerful upright vacuum cleaner featuring advanced suction technology, a HEPA filtration system, multiple cleaning modes, LED headlights, a swivel steering handle, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, HEPA filter, Dust cup, Handle with controls, Power cord, LED headlights, Swivel steering, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Motorized brush roll	Deep cleans carpets and agitates embedded dirt
HEPA filtration system	Captures 99.9% of dust and allergens
LED headlights	Illuminates dark areas under furniture
Swivel steering	Provides maneuverability around obstacles
Multiple cleaning modes	Carpet, Hard Floor, and Bare Floor settings
Quick-release dust cup	Easy to empty and clean
Attachments storage	Built-in holder for tools on vacuum body
Power cord length	25-foot cord for extended reach
Handle controls	On/Off, Mode selection, Brush roll on/off
Washable filters	Reusable for cost-effective maintenance

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach handle: Insert handle into main body until it clicks securely.
Install dust cup: Slide dust cup into place until it locks.
Attach hose: Connect hose to vacuum body and handle.
Install filters: Place pre-motor and HEPA filters in their compartments.
Attach cleaning tools: Store attachments on built-in holder.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow operational steps.

Select cleaning mode: Use mode switch for Carpet, Hard Floor, or Bare Floor.
Adjust suction: Use power dial if available for different surfaces.
Turn on brush roll: Engage for carpets; disengage for hard floors.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark SP1000 Upright Vacuum.
Power: 120V AC, 60Hz, 12 Amps.
Cord Length: 25 feet.
Filtration: HEPA filter, washable pre-motor filter.
Dust Cup Capacity: 1.5 liters.
Cleaning Modes: Carpet, Hard Floor, Bare Floor.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 15 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle. Power Button: Turns vacuum on/off. Mode Switch: Selects cleaning surface. Brush Roll Switch: Engages/disengages brush roll. Suction Control: Adjusts suction power (if equipped).

LED Indicators: Power on, Brush roll engaged, Filter check. Handle: Adjustable height settings for different carpet piles.

Maintenance: Filter reset button after cleaning filters. Cord rewind: Manual rewind for power cord.

Using Attachments

Attachments for specific cleaning tasks: Crevice tool, Dusting brush, Upholstery tool.

Turn off vacuum and unplug before changing attachments.
Remove hose from dock and attach desired tool.
Select appropriate suction setting for attachment.
Clean hard-to-reach areas: edges, ceilings, furniture, stairs.
Return attachment to storage after use.

Tip: Use dusting brush for delicate surfaces and upholstery tool for furniture.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Engages brush roll for deep cleaning; adjust height for pile.
Hard Floor Mode: Disengages brush roll; uses suction only.
Bare Floor Mode: Similar to hard floor; may reduce suction to prevent scattering.
Manual suction control: Adjust via dial for delicate rugs or high-pile carpets.

WARNING! Do not use carpet mode on hard floors as it may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filters: Wash pre-motor and HEPA filters every 3 months (air dry completely).
Check brush roll: Remove hair and debris monthly.
Inspect hose and attachments: Clear clogs if suction reduces.
Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Safety Information

Read all instructions before use. Keep away from children. Do not use near water. Do not vacuum flammable materials. Unplug when not in use.

WARNING! Risk of electric shock. Do not use with damaged cord or plug. Do not pull cord to unplug.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is covered by U.S. patents. ETL listed.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/plug	Check outlet; ensure plug is secure; check circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and attachments for blockages.
Brush roll not spinning	Debris/engagement	Turn off; clear debris from brush roll; ensure mode is set to carpet.
Overheating	Clog/filter	Turn off; let cool; check for clogs; clean filters.
Unusual noise	Foreign object	Turn off; inspect brush roll and hose for objects.

Reset: Unplug for 30 minutes if unit overheats.

Service: 1-800-798-7398; www.sharkclean.com