Shark SONIC DUO ZZ550 26 Vacuum Cleaner Manual

The Shark SONIC DUO ZZ550 26 is a powerful dual-brushroll upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features Sonic technology for powerful suction, DuoClean brushroll system for multi-surface cleaning, Anti-Allergen Complete Seal technology, LED headlights, a large dust cup capacity, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with handle, DuoClean floor nozzle, wand, hose, and accessory tools.

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

1. Attach the handle: Insert handle into the main body until it clicks into place.
2. Connect the wand: Insert wand into the hose connector on the back of the vacuum.
3. Attach the floor nozzle: Connect the DuoClean nozzle to the wand until it locks.
4. Store attachments: Attach accessory tools to the onboard caddy.
5. Plug into a standard electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all parts are securely connected.

1. Power on: Press the power button located on the handle.
2. Select cleaning mode: Use the mode switch to select appropriate setting for your floor type.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Empty dust cup: After use, press release button to remove and empty dust cup.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: SONIC DUO ZZ550 26
• Type: Upright vacuum cleaner
• Technology: Sonic suction, DuoClean brushroll system
• Filtration: Anti-Allergen Complete Seal with HEPA filter
• Dust Cup Capacity: 1.5 quarts (dry)
• Cord Length: 25 feet
• Attachments: Crevice tool, dusting brush, upholstery tool
• Power Source: 120V AC, 60Hz
• Weight: 15.2 lbs

Controls and Settings

Main controls located on handle and body.

Handle: Power button, wand release button.

Body: Mode selector switch (Carpet/Hard Floor), dust cup release button, brushroll on/off switch (for hard floors).

Settings: Carpet mode (activates both brushrolls for deep cleaning), Hard Floor mode (adjusts suction and brushroll speed), Brushroll On/Off (for delicate rugs).

Using Attachments

For above-floor cleaning, detach wand and connect desired tool.

1. Turn off and unplug vacuum.
2. Press wand release button to detach wand from floor nozzle.
3. Attach desired tool (crevice, dusting brush, upholstery) to end of wand or hose.
4. Plug in and power on to use.

Tip: Use crevice tool for tight spaces, dusting brush for shelves, and upholstery tool for furniture.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet Mode: Use for medium to high-pile carpets. Provides deep cleaning with both brushrolls engaged.
2. Hard Floor Mode: Use for wood, tile, laminate. Reduces suction and brushroll speed to prevent scattering debris.
3. Brushroll On/Off: Turn brushroll off when cleaning delicate area rugs or to prevent scattering on hard floors.

WARNING! Always select correct mode for floor type to avoid damage to surfaces or vacuum.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean filter monthly: Remove, tap out debris, rinse with cold water (air dry 24 hours).
3. Check and remove debris from brushrolls weekly.
4. Inspect hose and wand for clogs periodically.
5. Store in a dry place.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com