Shark SONIC DUO SP600 26 Vacuum Cleaner Manual

The Shark SONIC DUO SP600 26 is a powerful dual-brushroll upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features Sonic technology for enhanced agitation, DuoClean power for multi-surface cleaning, Anti-Allergen Complete Seal technology, a large-capacity dust cup, LED headlights, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with handle, Floor nozzle with dual brushrolls, Telescoping wand, Dust cup with filter, Power cord, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach the handle: Align the handle with the main body until it clicks into place.
2. Connect the floor nozzle: Insert the nozzle into the bottom of the vacuum until it locks.
3. Attach the telescoping wand: Insert the wand into the wand port on the back of the vacuum.
4. Install attachments: Store crevice tool, upholstery tool, and dusting brush on the provided caddy or dock.
5. Plug into a standard 120V AC power outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

1. Power on: Press the power switch located on the handle.
2. Select surface setting: Use the brushroll control to select "Carpet" or "Hard Floor" mode.
3. Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
4. Empty dust cup: Press the dust cup release button and empty contents into trash when full.
5. Store properly: Wrap the power cord around the cord hooks and store in a dry place.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair, strings, and cords away from brushroll.

Specifications

• Model: SONIC DUO SP600 26.
• Power Source: 120V AC, 60Hz.
• Cord Length: 26 feet.
• Dust Cup Capacity: 1.2 quarts.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Brushrolls: Dual motorized brushrolls with Sonic technology.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Weight: 15.4 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle and body. Handle: Power switch, Brushroll control (Carpet/Hard Floor/Off). Body: Dust cup release, Wand release button, Handle release lever.

Settings: Carpet Mode (brushroll spins for deep cleaning), Hard Floor Mode (brushroll spins at lower speed), Brushroll Off (for delicate rugs or when using attachments). LED lights automatically turn on when vacuum is powered.

Using Attachments

For above-floor cleaning: detach the wand and connect desired attachment.

1. Turn off and unplug the vacuum.
2. Press the wand release button and pull the wand out.
3. Connect the crevice tool, upholstery tool, or dusting brush to the end of the wand.
4. Plug in the vacuum, turn it on, and begin cleaning.
5. When finished, turn off, unplug, and reattach the wand to the vacuum body.

Tip: Use the upholstery tool for sofas and curtains; the crevice tool for tight spaces; the dusting brush for shelves and blinds.

Cleaning Modes & Surfaces

Optimize cleaning for different surfaces.

1. Carpets: Use "Carpet" mode. Move slowly to allow brushrolls to agitate deeply.
2. Hard Floors: Use "Hard Floor" mode. Brushrolls gently sweep debris into the suction path.
3. Area Rugs: For delicate rugs, turn brushroll off to use suction only.
4. Above Floor: Use attachments with wand for furniture, stairs, ceilings.
5. Under Furniture: Recline handle fully and use LED lights to see hidden debris.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects that could damage the brushroll or dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup after each use: Press release button, empty, and reinstall.
2. Clean filters monthly: Rinse HEPA filter and pre-motor filter under cold water; air dry for 24 hours before reinstalling.
3. Check and clear brushrolls weekly: Remove hair and strings wrapped around brushrolls.
4. Inspect hose and wand for clogs: Disconnect and clear any obstructions.
5. Store in a cool, dry place away from direct sunlight.

CAUTION! Always unplug before maintenance. Do not use damaged filters or brushrolls.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes to reset thermal protector if overheated.

Service: 1-800-798-7398; www.sharkclean.com