Shark SK460 series Vacuum Cleaner Manual

The Shark SK460 series is a versatile upright vacuum cleaner designed for deep carpet cleaning and above-floor versatility. It features a powerful motor, advanced swivel steering, a lift-away pod for portable cleaning, HEPA filtration, multiple brush rolls for different surfaces, and various attachments for detailed cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized floor nozzle, HEPA filter, Crevice tool, Upholstery tool, Dusting brush, and Power cord with wrap.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

1. Attach handle: Insert handle into upright body until it clicks securely.
2. Connect hose: Attach hose to the back of the vacuum body.
3. Install floor nozzle: Slide nozzle onto the bottom of the vacuum until it locks.
4. Attach wand: Connect extension wand to hose and handle.
5. Store attachments: Place tools in on-board storage caddy.

WARNING! Ensure all parts are securely connected before use to prevent injury or damage.

First-Time Use

Plug into a standard 120V outlet; ensure area is clear of obstacles.

1. Select surface setting: Use brush roll switch for carpets or hard floors.
2. Adjust suction: Use power/suction control dial if available.
3. Begin vacuuming: Push vacuum forward and back in overlapping strokes.
4. Use Lift-Away mode: Press release button to detach pod for stairs/upholstery.
5. Attach tools: Select appropriate attachment for detailed cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

• Model Series: SK460 (multiple variants).
• Power: 120V, 60Hz, 10 Amps.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Filtration: HEPA filter, washable foam and felt filters.
• Nozzle Width: 12 inches.
• Weight: 15 lbs (approx).
• Warranty: Limited 5-year warranty (varies by model).
• Operating Temp: Standard indoor conditions.

Controls and Settings

Main controls located on handle and body.

Handle: Power button, Suction control dial, Brush roll on/off switch, Lift-Away release button.

Settings: Power (On/Off), Suction (Low/High/MAX), Brush Roll (Carpet/Hard Floor/Off), Lift-Away mode (detach pod). Indicators: Filter check light, Full dust cup indicator. Accessories: Use tool holder for storage; attach tools to wand or hose end.

Using Attachments

Attach tools to wand or hose for above-floor cleaning.

1. Detach pod: Press Lift-Away button to separate from upright body.
2. Select tool: Crevice tool for tight spaces; upholstery tool for furniture; dusting brush for surfaces.
3. Connect: Insert tool into end of hose or extension wand.
4. Clean: Use appropriate motion (back-and-forth for upholstery, sweeping for dusting).
5. Return: Store tools in on-board caddy after use.

Tip: For best results, move attachments slowly over surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Check brush roll: Regularly remove hair and debris wrapped around roller.
2. Inspect hose: Ensure no clogs or obstructions in hose or wand.
3. Examine wheels: Clean wheels to prevent marking floors.
4. Store properly: Wrap cord around hooks; store in dry area.

WARNING! Always unplug vacuum before performing any maintenance.

Emptying the Dust Cup

Empty dust cup when full indicator lights or after each use.

1. Unplug vacuum.
2. Press dust cup release button to remove from body.
3. Hold over trash can; press bottom release latch to open door.
4. Tap gently to dislodge fine dust.
5. Close door securely and reattach to vacuum.

CAUTION! Do not overfill; empty outdoors if possible to reduce dust.

Cleaning the Filters

Clean filters every 3 months or as needed for maintained suction.

1. Unplug and remove dust cup.
2. Locate filters: Pre-motor foam filter and post-motor HEPA filter.
3. Remove filters: Twist or pull to release.
4. Rinse: Use cold water only; no detergents. Air dry completely (24 hours).
5. Reinstall: Ensure filters are completely dry before replacing.

WARNING! Never operate vacuum without all filters installed and dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is for household use only.

Troubleshooting

Reset: Unplug for 60 minutes to reset thermal protection.

Service: 1-800-798-7398; www.sharkclean.com