Shark SharkION X40 Vacuum Cleaner Manual

The Shark SharkION X40 is a powerful cordless stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, a versatile cleaning kit, and a docking station for charging and storage. It offers multiple cleaning modes, a self-cleaning brushroll, and a runtime of up to 60 minutes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using the Cleaning Kit 7. Maintenance & Care 8. Battery & Charging 9. Storage & Safety 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean PowerFins brushroll, LED headlights, Dust Cup with Anti-Allergen Seal, Battery Pack, Docking Station, and Cleaning Kit (crevice tool, dusting brush, upholstery tool).

FeatureDescription
DuoClean PowerFinsDual brushroll system for deep carpet cleaning and hard floor pickup
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates hidden debris under furniture
Cordless DesignProvides up to 60 minutes of runtime per charge
Large Dust Cup0.8-quart capacity with easy-empty mechanism
Cleaning ModesEco, Normal, and Boost for varying suction power
Self-Cleaning BrushrollReduces hair wrap for easier maintenance
Docking StationFor convenient charging and storage
Versatile Cleaning KitTools for above-floor cleaning
Washable FiltersFoam and felt filters for easy cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the handle: Align the handle with the main body until it clicks into place.
  2. Install the battery: Slide the battery pack into the base until it locks.
  3. Attach the floor nozzle: Connect the DuoClean PowerFins nozzle to the vacuum body.
  4. Set up the docking station: Place on a flat, stable surface near a power outlet.
  5. Charge the vacuum: Place the vacuum on the docking station; the indicator light will illuminate.

WARNING! Ensure the vacuum is powered off during assembly. Keep small parts away from children.

First-Time Use

Fully charge the vacuum before first use (approx. 4 hours).

  1. Power on: Press the power button on the handle.
  2. Select mode: Use the mode button to cycle through Eco, Normal, and Boost.
  3. Begin cleaning: Push the vacuum forward and back over surfaces.
  4. Empty dust cup: Press the release button to detach and empty when full.
  5. Use attachments: Detach the floor nozzle and connect desired tools for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Avoid pulling by the hose.

Specifications

Controls and Modes

Main controls located on the handle: Power button, Mode button, and Brushroll button.

Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco (extended runtime), Normal (balanced cleaning), and Boost (max suction for tough messes). Brushroll Button: Activates/deactivates the brushroll for hard floors or delicate rugs.

LED Indicators: Battery status (green = charged, red = low, flashing = charging).

Using the Cleaning Kit

Detach floor nozzle to connect tools for above-floor cleaning.

  1. Crevice Tool: For tight spaces, corners, and between cushions.
  2. Dusting Brush: For delicate surfaces, blinds, and shelves.
  3. Upholstery Tool: For sofas, chairs, and stairs.

Tip: Ensure the vacuum is in the upright or handheld position when using attachments.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filters monthly: Rinse foam and felt filters under water; air dry completely for 24 hours before reinstalling.
  3. Clear brushroll: Remove debris and hair from the brushroll regularly.
  4. Check for blockages: Inspect hose, nozzle, and tools if suction decreases.
  5. Wipe exterior: Use a dry cloth to clean the vacuum body.

WARNING! Do not operate with wet filters. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only the provided docking station and charger.

CAUTION! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble.

Storage & Safety

Store on the docking station to keep charged and ready.

Safety Precautions:

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not chargedPlace on docking station; ensure charger is plugged in.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; clean filters; check for blockages in hose and nozzle.
Brushroll not spinningHair/debris wrapTurn off and clear brushroll; ensure brushroll is activated.
Short runtimeOld battery/Boost modeUse Eco mode for longer runtime; consider battery replacement if aged.
Vacuum overheatingBlockage/continuous useTurn off and let cool; check for clogs; avoid using for extended periods in Boost mode.

Reset: Turn off, remove battery for 30 seconds, reinsert, and recharge.

Service: 1-800-798-7398; sharkclean.com

Shark SharkION X40 Vacuum Cleaner Manual © - All Rights Reserved 2025