Shark SD200 Vacuum Cleaner Manual

The Shark SD200 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brush roll, multiple height settings, a large-capacity dust cup, HEPA filtration, a detachable hose with accessories, and a lightweight yet durable design. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Operating Instructions 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, Height adjustment lever, Dust cup release button, Power switch, Hose and wand, Accessory storage, HEPA filter, Cord wrap hooks.

Feature	Description
Motorized brush roll	Deep cleans carpets and agitates embedded dirt
Height adjustment lever	5 settings for different floor types (bare floor to plush carpet)
Dust cup release button	Easy one-touch emptying
Power switch	On/Off control with indicator light
Detachable hose & wand	For above-floor cleaning (upholstery, stairs, ceilings)
Accessory storage	Integrated caddy for crevice tool, dusting brush, and upholstery tool
HEPA filtration	Captures 99.9% of dust and allergens
Cord wrap hooks	Secures power cord when not in use
Large capacity dust cup	0.8 gallon capacity; no bags required
Lightweight design	Easy to carry and maneuver

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the handle: Align handle with body and push down until it clicks into place.
Install the hose: Connect hose to port on back of vacuum; ensure secure fit.
Attach wand: Insert wand into hose connector until it locks.
Store accessories: Place crevice tool, dusting brush, and upholstery tool in storage caddy.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brush roll during installation.

Operating Instructions

Power on vacuum; adjust settings as needed.

Select floor setting: Use height adjustment lever based on floor type (lowest for bare floors, highest for thick carpets).
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Use attachments: Detach wand and hose for above-floor cleaning; select appropriate tool.
Turn off and unplug: After use, switch off, unplug, and wrap cord.

CAUTION! Do not vacuum wet surfaces, large objects, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark SD200 Upright Vacuum.
Power: 8.0 amps, 120V AC, 60Hz.
Dust Cup Capacity: 0.8 gallons (3.0 liters).
Cord Length: 25 feet.
Filtration: HEPA filter (washable).
Brush Roll: Motorized, self-cleaning.
Height Settings: 5 positions.
Weight: 12.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Hose release button. Body: Height adjustment lever, Dust cup release, Cord wrap hooks.

Height Adjustment: Lever on front adjusts brush roll height (1=lowest for hard floors, 5=highest for plush carpet). Power Switch: On/Off with LED indicator. Brush Roll On/Off: Switch for turning brush roll on for carpets or off for delicate floors.

Accessory Use: Detach hose and wand; attach tools for specific cleaning tasks.

Attachments & Accessories

Included: Crevice tool, Dusting brush, Upholstery tool, Pet hair tool (optional).

Crevice tool: For tight spaces, corners, and along baseboards.
Dusting brush: For delicate surfaces, blinds, and shelves.
Upholstery tool: For sofas, chairs, and car interiors.
Pet hair tool: Effectively removes pet hair from fabrics (sold separately).

Tip: Ensure attachments click securely into wand or hose before use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Check brush roll: Regularly remove hair and debris wrapped around brush roll.
Inspect hose and wand: Clear any blockages.
Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
Store properly: Keep in dry area, with cord wrapped.

WARNING! Always unplug vacuum before performing any maintenance. Do not immerse in water.

Emptying the Dust Cup

Empty dust cup when it reaches MAX fill line.

Turn off and unplug vacuum.
Press dust cup release button; lift cup out.
Hold over trash can; press bottom latch to open door and empty contents.
Close door securely; reinsert dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in well-ventilated area to minimize dust exposure.

Filter Care

HEPA filter should be cleaned monthly for best performance.

Remove filter: Turn filter cover knob counterclockwise; lift out filter.
Clean filter: Tap gently to remove loose dust; rinse under cold water until water runs clear.
Dry completely: Allow filter to air dry for at least 24 hours before reinstalling.
Reinstall: Place dry filter back into compartment; turn cover knob clockwise to lock.

Note: Do not use vacuum without filter. Replace filter every 12-18 months or as needed.

Regulatory Information

UL Listed; complies with U.S. safety standards. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty. Refer to warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check outlet; ensure plug is secure; verify power switch is ON.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and brush roll for blockages.
Brush roll not spinning	Debris/worn belt	Clear hair and debris from brush roll; inspect and replace belt if necessary.
Vacuum is overheating	Clog/filter	Turn off and unplug; clear any clogs; check and clean filter.
Unusual noise	Foreign object	Turn off immediately; check for and remove any objects in brush roll or hose.

Reset: Turn off, unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com